Presets
Playback
Technique analysis
Optimise stance
Exercise
Body and load
Tempo
Camera
Layers
Quality
Model check
The science
The model
The body is a planar (sagittal-plane) chain of rigid segments with the standard anthropometric data of Winter (after Dempster): foot 1.45 %, shank 4.65 %, thigh 10 % of body mass per leg and a head-arms-trunk block of 67.8 %; centres of mass at 0.433 of the shank and thigh from the proximal joint and 0.626 of the trunk above the hip; radii of gyration 0.30, 0.32, 0.50 of the segment length. Segment lengths are fractions of body height (thigh 0.245 H, shank 0.246 H, trunk 0.288 H, foot 0.152 H). The two legs move together, so the model carries doubled leg masses.
Kinematics and balance
Squat, deadlift and jump use prescribed shank, thigh and trunk angles from the vertical. The trunk lean is not prescribed: it is solved at every instant so that the centre of mass (body plus barbell) stays over a chosen point of the foot, which is what a lifter does to stay balanced. A heavier bar or a longer thigh therefore produces more forward lean automatically.
Inverse dynamics
Segment accelerations come from finite differences of the pose. Whole body: F = sum m_i (a_i + g) and the centre of pressure from (x_cop - x_com) F_y + y_com F_x = sum [ r_i x m_i a_i + I_i alpha_i ]. Joint loads are then found from the foot upwards with Newton-Euler for each segment, F_prox = m a - m g - F_dist, M_prox = I alpha - M_dist - r x F; joint power is P = M (omega_dist - omega_prox). Positive moments are extensor moments. For the jump the take-off speed follows from the joint kinematics and the flight is ballistic: h = v^2 / 2g, t_f = 2 v / g.
Push-up and running
The push-up is a rigid plank pivoting about the toes with two-link arms; hand force, toe force and toe friction come from a 3 x 3 linear solve of the force and moment balance, and the elbow moment from the hand force times its horizontal lever arm. Running uses the spring-mass description: a half-sine contact force F(t) = F_max sin(pi t / t_c) whose impulse must equal m g (t_c + t_f), so F_max = (pi / 2) m g (1 + t_f / t_c); the limb angles are a qualitative template, not measured data.
Honest simplifications
- Planar model: no frontal-plane or rotational effects, no muscles, tendons, joint limits or co-contraction; moments are net joint moments, not muscle forces.
- Kinematics are prescribed, so the model shows what the net moments must be for that movement, not whether a person could do it. Landing after the jump and gait joint moments are not modelled.
- The joint-load index is a heuristic comparison against round reference moments, not a medical injury risk. The stance optimiser only moves the balance point inside the foot to minimise peak hip + knee moment.
Things to try
- Raise the barbell load and watch the trunk lean and hip moment rise.
- Click the thigh, shank or trunk to read its mass.
- Run the stance optimiser for a deep squat and apply the result.