Visual weight seesaw (3D)

The shapes of a picture stand on a Blender-built balance beam; the beam tilts with the torque of their contrast-weighted visual weight.

Switch to 2D

Presets

Playback

Shape

Picture

Camera

Layers

Quality

Model check

The science

The model

Each shape i gets a visual weight w_i = A_i ln(CR_i): its area A_i (circle pi s^2/4, square s^2, equilateral triangle sqrt(3) s^2/4, with s as a fraction of the picture width) times the natural logarithm of the WCAG contrast ratio against the background, CR = (Y_light + 0.05) / (Y_dark + 0.05), with Y the relative luminance from 0 (black) to 1 (white). A shape with the same luminance as the background has CR = 1 and weight 0. The visual centroid is the weighted mean position c = sum(w_i r_i) / sum(w_i), exactly like a centre of mass. The torque about the vertical centre line is M_x = sum w_i (x_i - 1/2); the picture is balanced left to right when M_x = 0. A counterweight of weight w = -M_x / (x_c - 1/2) at distance x_c cancels it.

The seesaw tilt is an analogy, not a measured quantity: the beam of half-length 1/2 turns by atan(M_x / (W / 2)), so a centroid at the picture edge gives 45 degrees. The distance from the centroid to the nearest rule-of-thirds point (1/3, 2/3) or golden-ratio point (0.382, 0.618) is reported as plain geometry, not as a quality score.

Honest limits

Real visual weight also depends on hue, isolation, edges, texture, subject matter and where people look first; this model keeps only size and luminance contrast, which are measurable. It does not judge whether a composition is good art: balance is one property among many, and many strong pictures are deliberately unbalanced. The logarithm of the contrast ratio is a modelling choice (perceived brightness differences grow roughly with the logarithm of the stimulus), not a law.

Independent checks on this page

(1) Torques about the centroid cancel and the parallel-axis theorem holds. (2) Moving all shapes moves the centroid by the same vector; scaling all areas leaves it unchanged. (3) The counterweight solver brings the torque to zero. (4) Contrast and area formulas: black on white is exactly 21, equal luminance gives weight 0, the ratio is symmetric, the triangle area is sqrt(3)/4.

What you see in 3D

Each shape stands on the beam at its horizontal position: footprint = size, height = ln(contrast ratio), colour = luminance. Beam depth shows the vertical position (top of the picture is toward the wall). The yellow ball marks the visual centroid. The beam turns by the analogy angle described above.

Loading model...
Loading Blender model...
Torque contribution of each shape about the centre line
Weight per unit area versus shape luminance
Centroid offset versus counterweight size
Made with 🟠 Blender · Three.js