Presets
Playback
Ramp and crate
Camera
Layers
Quality
Model check
The science
What is modelled
A crate sits on a hinged ramp 4 m long. A winch at the top pulls it along the ramp with a force you choose. You set the angle, the mass and the friction of the surfaces. The ramp trades force for distance: a gentler slope needs a smaller pull but a longer way, and friction adds extra work.
Equations
- Along the slope: weight component
Fg = m g sinθ(down the slope); pressing on the rampN = m g cosθ. - Friction: static
f ≤ μs Nwhile at rest, slidingf = μk Nagainst the motion. The crate moves only when|F − Fg| > μs N. - Motion:
m a = F − m g sinθ − μk m g cosθ(moving up), integrated with a 1 ms step. - Ideal mechanical advantage
MA = L / h = 1 / sinθ; force to hold without frictionm g sinθ. Pulling at steady speed needsm g (sinθ + μk cosθ). - Efficiency of a steady lift
η = m g h / (F L) = sinθ / (sinθ + μk cosθ) = tanθ / (tanθ + μk). - Energy: winch work
∫F ds= heat from friction + kinetic energy + height energym g Δh. - A crate slides down by itself when
tanθ > μs(critical angle).
Checks run in the page
- Energy accounting over 3 s of winching closes: work = heat + motion + height.
- The simulated distance and speed after 2 s equal the constant-acceleration formulas.
- Bisection on the simulated unpulled crate finds the sliding angle equal to arctan of the static friction coefficient.
Honest simplifications
- The crate is a point mass that does not tip; the rope is massless, always parallel to the ramp and does not stretch; the winch holds the chosen force whatever the speed (a real winch motor has a power limit); friction coefficients are constants and the sliding value never exceeds the static one. The crate stops inelastically at the ends of its track, and that lost energy is not shown in the energy graph.
What to try
- Press "Force to hold the crate" at 10 deg and at 50 deg and compare the force with the weight.
- Use the ice preset and then the critical-angle preset: the crate starts to slide just beyond arctan(mu_s).
- Watch how much extra work friction costs on a gentle ramp compared with a steep one (third graph).
- Switch to rollers: efficiency approaches 100 % but the force still follows m g sin(theta).
Loading model...
Loading Blender model...