3D Photoelectric Effect

Light on a metal cathode in a phototube: threshold wavelength, stopping voltage, I-V curve and a measurement of Planck constant.

Switch to 2D

Presets

Playback

Planck constant experiment

Light

Phototube

Camera

Layers

Quality

Model check

The science

What is modelled

A vacuum phototube on an optical bench. Light of a chosen wavelength and intensity falls on a metal cathode. If each photon carries more energy than the metal's work function, electrons are released with kinetic energies up to hf − φ. A voltage on the anode pulls them across (positive) or holds them back (negative). The microammeter and voltmeter on the bench are driven by the model.

Equations

  • Photon energy: E = h f = h c / λ, with hc = 1239.84 eV nm.
  • Einstein's photoelectric equation: Kmax = h f − φ; threshold wavelength λ0 = h c / φ; stopping voltage Vs = Kmax/e = (h/e) f − φ/e (a straight line of slope h/e).
  • Saturation current: Isat = η e P A / E, where P A is the light power on the cathode, and the quantum efficiency η = 0.002 (1 − φ/E) (illustrative, zero at threshold).
  • Current at anode voltage V: I = Isat F, with F = 1 for V ≥ 0 and F = 1 − 3u2 + 2u3, u = |V|/Kmax, for V < 0 (energy distribution p(K) ∝ K (Kmax − K), a simple model).
  • Electron animation: constant sideways speed and s″ = C2 V / (2 d) along the tube axis, so energy changes by e V across the gap d = 9.5 cm; time is slowed so that a 1 eV electron crosses in 0.9 s.

Checks run in the page

  • Six stopping voltages are read from the model I-V curve by bisection and a straight line is fitted; its slope gives Planck's constant and its intercept the work function.
  • Just above the threshold wavelength there is no current for any intensity; just below it there is.
  • 20000 sampled electrons: none above hf − φ, mean energy half of it, half beat a retarding voltage of Kmax/2.

Honest simplifications

  • Work functions are typical clean-surface values (real ones depend on the surface). Contact potential, thermionic emission, space charge, reflection of light, the exact energy distribution of electrons (here a simple parabola) and the true voltage dependence of the current below saturation are not modelled. The quantum-efficiency law and the 1 cm2 illuminated area are illustrative. Colours of the beam are an approximation, and ultraviolet light is drawn dim violet although it is invisible.

What to try

  • Sodium in red light: raise the intensity to the maximum; still no electrons.
  • Use "Brighter light, same stopping voltage": the current rises, the stopping voltage does not.
  • Press "Record 6 stopping voltages" for each metal: all lines have the same slope h/e but different intercepts.
  • Move the anode voltage below zero and watch electrons turn back.
Loading model...
Loading Blender model...
Photocurrent vs anode voltage
Stopping voltage vs frequency
Kinetic energy of emitted electrons
Made with 🟠 Blender · Three.js