3D Newton's Cradle: Hertz Contact, Momentum and Energy

A Blender-modelled cradle of polished spheres: each collision is a Hertz contact lasting about a tenth of a millisecond, and the pulse travels through the chain.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A row of identical hanging spheres. Each ball is a pendulum of length L; neighbours push on each other only while they overlap, with the force of a Hertz contact between elastic spheres. The page integrates all pendulum angles with a small step (a fraction of a contact time), so the pulse of compression that crosses the chain is resolved, not assumed.

Equations

  • Pendulum: m L2 θ'' = −m g L sinθ + Q − γ m L2 θ', where Q is the torque from the contact forces. The exact swing period is T = 4 √(L/g) K(sin(θ0/2)), computed with the arithmetic-geometric mean, and approaches 2π√(L/g) for small swings.
  • Hertz contact between two spheres of radius R: F = k δ3/2 with k = (4/3) E* √R*, E* = E / (2(1 − ν2)) and R* = R/2 for identical spheres. The stored elastic energy is (2/5) k δ5/2.
  • A head-on collision at speed v lasts Tc = 2.9432 δmax / v with δmax = (15 m* v2 / (16 E* √R*))2/5 and m* = m/2. For steel spheres of 2 cm radius this is about 0.1 millisecond, which is why the real cradle looks instantaneous.
  • Losses use the Hunt-Crossley form F = k δ3/2 [1 + 3(1 − e) δ' / (2 v0)], which reproduces the chosen coefficient of restitution e for an impact at the release speed.
  • Momentum and energy: a lossless two-ball collision swaps the velocities of equal masses. In a chain, two balls arriving send two balls out the far side because only that outcome conserves both momentum Σm v and kinetic energy Σ½ m v2 (for exactly touching balls, up to a small residue that Hertz contact leaves behind).

Checks run in the page

  • A two-ball collision is integrated and its contact time and maximum overlap are compared with the closed-form Hertz values for the selected material.
  • The integrator's swing period is compared with the exact elliptic-integral period at 20 and 60 degrees.
  • A lossless five-ball steel chain with two balls lifted is run until the pulse has left: outgoing speeds, total momentum and kinetic energy are compared with the incoming ones.

Honest simplifications

  • The strings are massless and inextensible, pivots are frictionless apart from the small damping term, and the motion stays in one plane. The balls do not rotate and carry no friction.
  • Hertz theory assumes static contact. Stress waves inside the spheres, plastic deformation and sound radiation are ignored; they matter for the finer energy loss of real steel and for audible clicks.
  • Material constants are typical handbook values. The visible glow at a contact is exaggerated and held for a moment so that a 0.1 ms event can be seen. Real overlaps are only a few micrometres.

What to try

  • Lift one ball, then two, then 1+1 from each side and watch the same number of balls leave.
  • Open a gap of 0.8 mm: the clean transfer breaks up into several separate hits.
  • Switch to rubber: contacts last milliseconds, the pulse spreads out and more balls move at once.
  • Set the time scale to 1/1000 and use the close-up camera to see the contact glow travel along the chain.
Loading model...
Loading Blender model...
Angles of the two end balls
Kinetic, gravitational and total energy
Peak contact force per pair
Made with 🟠 Blender · Three.js