Snow on a pitched roof. Ground snow load is sk = ρ g d (density times gravity times depth: 1 m of settled snow at 200 kg/m³ is about 2 kN/m²). A steeper roof keeps less of it. The page uses the Eurocode-style shape coefficient for an unobstructed roof: μ = 0.8 up to 30°, falling linearly to 0 at 60° (μ = 0.8 (60 − α)/30), so roof load = μ sk. The snow that slides off is shown piled beside the walls. Steep thatched roofs of about 60° (as in historic gassho-style farmhouses of snowy Japanese valleys) are commonly explained this way; this page is a physics illustration, not a restoration or heritage study.
Rafter bending. One rafter of a bay carries q = (roof snow + 0.6 kN/m² thatch / cos α) × 1.8 m per horizontal metre over the horizontal span B/2. Simply supported: Mmax = qℓ²/8, stress σ = M/W with W = bd²/6 for a 120 × 180 mm C24 section, compared with the design strength 0.9 × 24 / 1.3 = 16.6 MPa; deflection 5qℓ&sup4;/(384 E I). The page checks both against a numerical integration of the shear and moment diagrams.
Earthquake sway. The house frame is a single-degree-of-freedom shear model: m ζ̈ + c ̌z + k z = −m ag(t) with 5% damping. The stiffness comes from the empty-frame period T0; the mass m includes the roof and the snow, so T = T0 √(m/m0): heavy snow makes the house softer and lowers its natural frequency, which can move it toward or away from resonance with the shaking. Steady shaking gives the closed-form amplitude ag/ωn² / √((1 − r²)² + (2ζr)²), with r = f/fn, reaching ag/ωn²/(2ζ) at resonance. The page integrates the equation with RK4 and checks the period, the log decrement and the steady amplitudes. The drawing exaggerates the sway three times; the limit used is an illustrative drift of 1/120 of the height.
Simplifications. Linear elastic frame, one mode, no soil, no torsion, no joint slip or rocking, no wind, snow drifting or sliding delay, no thermal effects, and the roof and frame stiffness are teaching values rather than a design of any real building. Not for structural design.
Running numerical checks...