3D Magnus Effect: Free Kick Over the Wall

Drag, spin-driven Magnus force and the wall: a free kick in a Blender-built stadium, with predicted curved path, wall jump and goalkeeper dive.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A direct free kick from 16 to 32 m: a standard size-5 ball (22 cm, 0.43 kg) is struck with a chosen speed, loft, aim and spin. The air acts on it with a drag force and, because the ball spins, with a sideways Magnus force. A wall of players stands 9.15 m from the ball and jumps as the ball approaches; the goalkeeper reacts after 0.28 s and dives at a limited speed. The pitch, goal, net, stands, ball and players are Blender-built models; the motion is integrated in 3D every frame.

Equations

  • Newton: m dv/dt = m g + FD + FM with the air velocity relative to the ball u = v − w (w is the wind).
  • Drag: FD = −½ ρ A Cd(Re) |u| u, Re = ρ |u| D / μ, A = πR². For a football Cd is about 0.47 at low Reynolds number and drops to about 0.2 near Re = 2.2×105 (the drag crisis, at about 15 m/s), which is why a slow ball and a hard-struck ball behave differently.
  • Magnus force: FM = ½ ρ A CL |u|² (ω̂ × û), perpendicular to both the spin axis and the airflow; the lift coefficient follows the empirical fit CL = 1/(2 + 1/S) with spin ratio S = ω R / |u|.
  • Side spin (vertical axis) bends the path sideways, back spin lifts it, top spin makes it dip. The curve radius for a pure side-spin ball in the horizontal plane is r = 2 m / (ρ A CL).
  • Integration: fourth-order Runge-Kutta, 10 ms planning steps and 4 sub-steps per frame in the live flight.

Checks run in the page

  • Without air, the 3D integrator reproduces the analytic parabola (range, apex, flight time).
  • A pure Magnus force on a ball with vertical spin axis (no gravity, no drag) moves it on a circle of radius 2m/(ρ A CL) at constant speed.
  • Energy balance: the loss of kinetic plus potential energy equals the work of the drag force; the Magnus force does no work.

Honest simplifications

The drag curve and the lift fit are smooth empirical shapes, not the data of one particular ball model; real balls differ by panel design and wear, and the exact crisis speed varies. Spin is held constant during the flight (real spin decays by only a few per cent in a second), there is no Magnus effect from the ball's own seam asymmetry, so the true knuckleball wobble is not reproduced (the no-spin kick here flies a smooth path). Wind is uniform. Collisions with the wall, post, crossbar and net are simple rebounds, the goalkeeper is a scripted dive with a reaction delay and a maximum lateral speed, and nothing models the grass beyond a bounce with energy loss.

What to try

  • Set the spin to zero and compare with the default: the cyan line and the white dashed line show how much the ball curves.
  • Press Auto-aim, then raise the spin: the ball curves around the wall but the aim has to move.
  • Choose the Strong crosswind preset and watch drag and Magnus change the line.
  • Use back spin (axis 85 degrees): the ball stays up longer and floats over the wall.
  • Use the Over the wall and Behind the goal cameras to see the wall jump and the keeper dive.
Loading model...
Loading Blender model...
Top view: path with and without spin
Side view: height along the pitch
Lateral position at the goal line vs spin rate
Made with 🟠 Blender · Three.js