Tensile Test: Hooke Law, Yield Point, Necking and Permanent Set

A round bar in a universal testing machine: elastic stretch, yield, hardening, necking, fracture and what is left after unloading.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A standard tensile test: a 12 mm round bar with a 100 mm gauge length is gripped in a testing machine and pulled by the moving crosshead. The load cell reads the force, an extensometer reads the stretch of the gauge, and the machine plots engineering stress against engineering strain. In the first part the bar obeys Hooke's law and springs back; past the yield stress it flows plastically and keeps a permanent set; at the tensile strength it begins to neck and finally it breaks.

Equations

  • Stress and strain: σe = F/A0, e = ΔL/L0; true values ε = ln(1+e) and σ = σe(1+e) (volume conserved).
  • Hooke's law and the spring constant of the bar: σ = E εel, k = F/ΔL = E A0/L0. The strain energy per volume is σ²/2E and it is returned on unloading.
  • Plastic flow with isotropic hardening (Ludwik law): once |σ| exceeds the current yield stress σy + K pn (p = accumulated plastic strain), the extra strain is plastic, so ε = σ/E + εp. Unloading and reloading follow the slope E, which is why a bar stretched past yield comes back to a permanent set εp = εmax − σmax/E.
  • Work per volume: W = ∫σe de = σ²/2E + σyp + K pn+1/(n+1); the first term is recoverable, the rest is dissipated as heat.
  • Offset yield: the stress where the curve meets the line σ = E(e − 0.002). Necking (Considère): the engineering stress peaks, and necking starts, when dσ/dε = σ.

Checks run in the page

  • Hooke stiffness k = dF/dL from two elastic points of each of the five materials against E A0/L0.
  • Permanent set after unloading from 3-12 % strain against the closed form built from a separate solve of the backbone curve.
  • The area under the simulated curve (100000 steps) against the closed-form work, and the recovered energy on unloading against σ²/2E.
  • The simulated tensile strength and offset yield against the Considère root and the closed-form offset stress.

Honest simplifications

  • The five materials use a smooth Ludwik hardening law with textbook-like constants; they are illustrative fits, not data for a particular alloy or heat treatment. Real mild steel has an upper and lower yield point with a plateau (Lüders strain), which is not drawn; real cast iron is not linear and its fracture is statistical.
  • Isotropic hardening and symmetric behaviour: the Bauschinger effect, strain-rate and temperature effects, creep and fatigue are left out; heat from plastic work is only reported, it does not change the material.
  • After the tensile strength the strain is assumed to concentrate in a neck zone of 20 % of the gauge while the rest of the gauge freezes; real necks have a smooth profile and a triaxial stress state. Fracture happens at a preset elongation, not from a damage model.
  • The machine, grips and load cell are perfectly stiff. Real tests correct for machine compliance and use an extensometer for strain. The elastic stretch is drawn larger by the chosen factor (default x40) so that it can be seen: it is only 0.1-0.2 % in reality. Speed is slowed in the elastic range for the same reason.

What to try

  • Choose Mild steel, press Pull, then Hold in the elastic range and Unload: the bar returns exactly to zero. Repeat after yield and read the permanent set.
  • Compare Aluminium and Copper: similar strength but very different stiffness (the slope of the dashed Hooke line) and ductility.
  • Cast iron breaks almost without plastic strain; spring steel stays elastic to over 0.6 % strain.
  • Watch the load fall as the neck forms, although the true stress in the neck is still rising.
Loading model...
Loading Blender model...
Engineering stress against strain: recorded test, Hooke line and 0.2 % offset line
Work per volume done by the machine and the recoverable elastic part
Stress-strain curves of all five materials
Made with 🟠 Blender · Three.js