3D Figure Skater Spin: Angular Momentum, Moment of Inertia and Energy

Spin up, then pull the arms in or raise the free leg: angular momentum stays fixed while the spin rate, moment of inertia and kinetic energy change.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

Conservation of angular momentum. A skater spinning on one blade is acted on by almost no external torque about the vertical axis, so the angular momentum L = Iω stays constant. Pulling the arms in reduces the moment of inertia I, so the spin rate ω must rise in inverse proportion. The kinetic energy L²/(2I) rises too: the extra energy is the work the skater does pulling the arms inward against the centripetal force, which the third check evaluates element by element.

Moment of inertia. The skater is a composite body: a torso cylinder (½mr²), a head sphere (⅔mr²), a support leg on the axis, two arms and a free leg modelled as uniform rods. A rod of mass m and length L hanging from a point rs from the axis and raised by an angle α from straight down has I = m(rs² + rsL sinα + L²sin²α/3). Arms at the sides (α = 0) or straight overhead (α = 180°) are both close to the axis; arms out (α = 90°) are the most expensive. Hand weights add w(rs + L sinα)² each. The camel-spin preset raises the free leg to horizontal.

Friction. The only external torque is dry friction of the blade tip, τ0 tanh(ω/0.05), plus air drag cω|ω|. L is integrated with RK4 for the current pose and ω = L/I, so a pose change itself never changes L.

Honest simplifications. The masses and lengths are plausible round numbers for an adult skater (total 61 kg), not a measured person. Arms and the free leg are straight rods swinging in a plane that contains the axis (real skaters bend the elbows and cross the arms, which reduces I further, so real speed-ups beyond 3 to 4 times are possible); the torso is a rigid cylinder and the support leg stays on the axis; the axis is held fixed (no precession or wobble, no travelling on the ice); the animation changes the pose at the chosen speed, whereas a real skater’s arm motion also exchanges small amounts of angular momentum with the torso. The friction constants are illustrative.

Checks. (1) The closed-form I against a numerical sum over 20,000 mass points per rod for four poses; (2) a frictionless pull-in and push-out conserves L and returns the original spin rate; (3) work on the arm elements equals the kinetic-energy gain; (4) the friction integrator against the linear (dry) and hyperbolic (air-drag) analytic solutions.

Loading model...
Loading Blender model...
Spin rate over time
Moment of inertia over time
Angular momentum over time
Made with 🟠 Blender · Three.js