Setting up the slab...
🎲 Domino Amplifier
Smallest / largest height-
Largest domino mass-
Toppled / total-
Energy released: first domino-
Energy released: last domino-
Last / first energy-
Energy bookkeeping error-
Bars: how many of the available dominoes fall for each growth factor, using your gap, push and restitution (green = the whole chain, red = it stalls). The dashed line is your current r. Dominoes are capped at 1 m tall.
The science

Each domino is a rigid slab (height h, thickness t = 0.156 h, width w = 0.5 h) that rotates about its front bottom edge: I θ'' = m g (h/2 sinθ − t/2 cosθ), I = m (h²+t²)/3. Here every domino is r times larger than the one before, so mass grows as r³, height as r, and therefore the energy released by toppling flat, ½ m g (h − t), grows as r&sup4;: for r = 1.5 each domino carries about 5 times the energy of the previous one. Chaining a dozen of them multiplies the available energy by roughly 108, which is why a gentle flick at one end can topple a domino taller than a person at the other.

Energy is not the only constraint. The tipping barrier ½ m g (√(h²+t²) − h) also scales as r&sup4;, so the real question is how much of the small domino's energy reaches the big one. The small domino meets the big one low on its back face and passes angular impulse through a frictionless contact: J = −(1+e) vn / (a1²/I1 + a2²/I2). A heavy target (large r) soaks up the impulse without reaching its tipping angle, and the cascade stalls. In this model, with the default gap, the chain stalls from r = 1.6 upward, in line with the demonstrations that use growth factors near 1.5 (Whitehead's domino amplifier, American Journal of Physics, 1983).

Scaling law used for the checks: multiply every length by λ and all times scale as √λ, so the largest dominoes fall in a slow, stately way while the tiny ones snap down.

What is simplified: one rotational degree of freedom per domino (no sliding), no slipping at the pivot, a frictionless impact with a constant e, contact only between neighbours, wood density 700 kg/m³ assumed, rigid bodies and still air. Real chains also fail through friction, misalignment and slipping, so the exact threshold on a real table will differ: treat r ≈ 1.5 working and r > 2 failing as a trend, not a measurement.

3D assets (dominoes with baked pips, slate slab with a 10 cm grid, steel ball) modelled and baked in Blender.

Drag to orbit · adjust the growth factor and press Topple
Made with 🟠 Blender · Three.js