Bragg Diffraction

Crystal planes, peak positions and peak width.

Switch to 3D

Presets

Playback

Crystal

Lattice constant, plane family and the number of planes reached by the beam.

Beam and detector

Wavelength, angle, automatic sweep and source strength.

Layers

Model checks

The science

Bragg's law

X-rays scattered by successive crystal planes spaced d apart travel paths that differ by 2 d sin(theta), where theta is the glancing angle to the planes. The scattered waves reinforce only when this is a whole number of wavelengths: n lambda = 2 d sin(theta). For a cubic crystal with lattice constant a, planes with Miller indices (hkl) are spaced d = a / sqrt(h^2 + k^2 + l^2).

N planes: the interference sum

If the beam reaches N planes, the amplitude is the sum sum_j exp(2 pi i j u) with u = 2 d sin(theta) / lambda, so the intensity is [sin(N pi u) / (N sin(pi u))]^2. It equals 1 when u is an integer (a Bragg peak) and has N - 2 small side maxima between peaks. The arrow diagram on the page adds the N amplitudes as phasors: on a peak they line up, away from it they curl into a circle and cancel.

Peak width

The full width at half maximum of a peak is about 0.886 / N in u, so in angle FWHM = 0.886 lambda / (2 N d cos(theta_B)). More planes give sharper peaks; this is the Scherrer relation between crystal size and line width, and the reason a perfect large crystal gives needle-sharp reflections.

The instrument

In a theta-2theta goniometer the crystal turns by theta while the detector arm turns by 2 theta, so the detector always sits at the specular direction. The detector counts follow Poisson statistics.

Simplifications

The crystal is treated as a stack of identical, equally weighted planes (kinematic theory): no absorption, no extinction or multiple scattering, no atomic form factor or structure-factor zeros, no thermal motion, and a perfectly monochromatic parallel beam. The crystal on the 3D bench is drawn with display spacing, not to scale.

What to try
  1. With the default settings, move theta slowly: the intensity jumps to 1 at 11.1 degrees (first order) and again at 22.6 degrees (second order) for 1.54 A X-rays on 4 A planes.
  2. Increase the number of planes from 6 to 50 and watch the peak sharpen while the side maxima multiply.
  3. Switch to the shorter wavelength: more orders become allowed and the Bragg angles move to smaller values.
  4. Choose the (211) family: the spacing is smaller, so fewer orders fit and the peaks sit at larger angles.
  5. Press the automatic sweep preset and watch the counts accumulate dot by dot along the theoretical curve.
Diffracted intensity against glancing angle
First-peak width against number of planes
Bragg angles against wavelength
Phasor chain of the plane amplitudes