A wavelength-division-multiplexing (WDM) add-drop router carries several optical channels on one bus waveguide. Each micro-ring resonator sits beside the bus and, at its resonant wavelength, evanescently couples power out to a "drop" waveguide while every other wavelength keeps going straight through:
Resonance: m·λ_res = n_eff · 2πR (m integer)
Drop transfer: T(λ) = 1 / (1 + ((λ-λ_res)/(FWHM/2))^2)
Linewidth: FWHM = λ_res / Q
Thermo-optic: Δλ_res ≈ λ_res·(1/n_g)·(dn/dT)·ΔT
- Channel to tune / Heater power — a resistive micro-heater raises the ring's local temperature, shifting n_eff and therefore λ_res (thermo-optic tuning, the standard way foundries trim and reconfigure PIC filters after fabrication).
- Channel spacing — sets how far apart the four input wavelengths sit; narrower spacing packs more channels but leaves less room before neighbours overlap.
- Q factor — set by the ring-to-bus coupling gap. A higher Q gives a narrower, more selective resonance (lower insertion loss on-channel) but also a tighter tuning tolerance, which is exactly the loss-vs-yield trade-off real PIC foundries balance with process control and design margin.
- Insertion loss / isolation — as the heater detunes the ring away from its own channel's wavelength, that channel's drop efficiency falls (rising insertion loss) while the resonance can drift toward a neighbouring channel (falling isolation, i.e. cross-talk) — the two failure modes every WDM filter has to be designed and packaged against.
Real-world relevance: this is the core building block behind add-drop multiplexers in datacom transceivers, reconfigurable optical routers, and multiplexed ring-resonator sensor arrays on silicon-photonic chips.