Presets
Playback
Camera and subjects
Rays and bellows are drawn to scale on the right of the lens; subject distances on the left are schematic.
Layers
Model checks
The science
Thin lens and bellows extension
A lens of focal length f forms a sharp image of a subject at distance u at the image distance v given by 1/f = 1/u + 1/v. A bellows camera focuses by racking the plate to exactly that v. For the 210 mm lens here, a subject at 2.4 m needs 230.1 mm of bellows; at 1:1 magnification v = 2f and the plate is twice as far from the lens as for infinity.
Circle of confusion and depth of field
A point not in focus becomes a disc on the plate with diameter c = (f/N) |vs − vo| / vo, where N is the f-number and vs the plate distance. If the disc is smaller than the acceptable limit (0.15 mm for this 5x7 inch plate) the subject looks sharp. The hyperfocal distance H = f²/(N c) + f gives the near and far limits u(H − f)/(H + u − 2f) and u(H − f)/(H − u); the far limit is infinity once the focus reaches H.
Why f/64 is not sharper
Stopping down shrinks defocus blur but diffraction grows as the Airy disc 2.44 λ N v/f, while lens aberrations shrink roughly as 1/N³ (a model value). The combined blur graph has a minimum around f/16 to f/22.
Exposure
Stops over the correct exposure are log2(t / N²) + EV + log2(ISO/100) − 2 log2(v/f); the last term is the light lost to bellows extension. Exposures longer than 1 s include a reciprocity-failure correction (a model value).
Honest simplifications: a thin ideal lens with on-axis points only, a single diffraction and aberration model for blur, no vignetting, and a plate with a fixed acceptable blur. The optics code is identical to the 3D page.
What to try
- Press Portrait, wide open: the far subject becomes a large blur disc while the focused one stays small.
- Press Landscape, deep focus and watch the green depth-of-field band stretch to infinity as the hyperfocal distance moves inside the focus distance.
- Press Diffraction f/64: the sharpest-blur graph turns up on the right.
- Take the exposure to 0 stops using a different aperture and shutter pair of the same EV.