Nuclear Reactor Control — 2D

Move the control rods and watch power, reactivity, period and temperature feedback respond (point-kinetics model).

Switch to 3D

Presets

Playback

Parameters

Layers

Model checks

The science

Neutron density n and six delayed-neutron precursor groups Ci obey the point-kinetics equations

dn/dt = ((ρ − β)/Λ) n + Σ λi Ci,   dCi/dt = (βi/Λ) n − λi Ci

with U-235 thermal data (β = 0.0065 split into six groups, λ from 0.0124 to 3.01 s−1). Reactivity ρ is the rod term, ρrod = ρex − W [x − sin(2πx)/2π], plus a fuel-temperature term αTΔT. Temperature rise follows τ dΔT/dt = ΔT0 n − ΔT.

Below prompt critical (ρ < β, i.e. 1 dollar) the response is set by delayed neutrons: after a step the power jumps by β/(β−ρ) and then grows with the inhour-equation root ω: ρ = Λω + Σ βiω/(ω+λi). A negative temperature coefficient turns a rod step into a new plateau at n = 1 + (−ρ/α)/ΔT0.

Simplifications: one lumped temperature, no xenon, no decay heat, no spatial flux dynamics (the core picture is schematic). This is an educational model of control, not a plant simulator.

What to try
  • Press Step +100 pcm: power jumps promptly, then settles on a plateau set by the temperature coefficient.
  • Set the temperature coefficient to 0 and step rods: the power grows with a steady period (compare with the inhour check).
  • Choose Positive feedback: power runs away until the automatic SCRAM drops the rods.
  • Shorten the prompt generation time: the prompt jump stays the same, only its speed changes.
Relative power n/n0 (log10) against time
Reactivity budget in pcm: rods, feedback, net
Temperature rise and rod position
Delayed-neutron groups: share of the delayed source