Presets
Playback
Stimulation
Stimulus
Axon
Synapse
Environment
Camera
Layers
Quality
Model check
The science
What is modelled
A neuron fires an action potential at its soma, the spike travels down the axon to the terminal, calcium entering the terminal makes synaptic vesicles fuse and release transmitter, and the transmitter depolarises the next cell. This page simulates each stage with a standard model and lets you change the stimulus, the fibre, the calcium level and the temperature.
Equations
- Soma (Hodgkin-Huxley):
C dV/dt = I − gNa m3h (V − ENa) − gK n4 (V − EK) − gL (V − EL)with C = 1 µF/cm2, gNa = 120, gK = 36, gL = 0.3 mS/cm2, ENa = +50, EK = −77, EL = −54.4 mV. Each gate obeysdx/dt = φ [αx(1 − x) − βx x]; the temperature factor isφ = 3(T − 6.3)/10(Q10 = 3). Integrated with RK4, step 0.004 ms. - Conduction velocity: myelinated
v ≈ 6 Dm/s (D in µm, Hursh rule), unmyelinatedv ≈ √Dm/s (squid-like), both multiplied by√(φ/φ37). Internode length is100 D. In a myelinated fibre the pulse jumps node to node, so the time per internode isLint/v. - Release: probability per occupied site
p = pmax [Ca]4 / ([Ca]4 + K4)(pmax = 0.8, K = 2 mM; the fourth power is the calcium cooperativity found by Dodge and Rahamimoff). Each of the N occupied sites releases independently, so the number of quanta is binomial with meanN pand varianceN p (1 − p). - Depression: an empty site refills with probability
1 − e−dt/τrecper step, so at high rates the pool is not full when the next spike arrives and the quanta per spike fall. - Post-synaptic cell:
τm dV/dt = −(V − Vrest) + k (sd − sr), where the synaptic term is a difference of two exponentials (τd = 2 ms, τr = 0.25 ms) and k is calibrated so that one quantum of unit size peaks at 1 mV. The cell fires when V passes −50 mV.
Checks run in the page
- The resting potential found algebraically (Newton root of the steady-state current balance) is compared with the value the integrator settles to, and a steady 3 and 10 µA/cm2 must give no and repetitive firing at 6.3 °C with a peak near +40 mV.
- The conduction velocity measured from the arrival times at nodes 1 and 8 of a live spike is compared with the empirical law for the chosen diameter, fibre type and temperature.
- 6000 fresh synapses are released with a separate random generator; the mean and variance of the quanta are compared with the binomial values N p and N p (1 − p).
- The linearity of the post-synaptic membrane: five simultaneous quanta must peak at five times one quantum.
Honest simplifications
- The axon is not a cable solved in space: the spike shape comes from one Hodgkin-Huxley compartment (the soma and initial segment) and the pulse is delayed along the axon by the empirical velocity. The empirical laws are typical, not fitted to one fibre.
- Each drawn myelin segment stands for K real internodes (default 20) so that a 5 µm fibre conducts across the screen in a visible time; the readouts give the real distance. The synaptic cleft is drawn about 100 times too wide, and the vesicle sizes and numbers are schematic.
- Release sites are independent and identical; there is no facilitation, no calcium buffering and no receptor desensitisation. The post-synaptic cell is a passive membrane with a fixed firing threshold. The Q10 scaling of velocity is approximate.
What to try
- Switch the fibre to unmyelinated and watch the spike crawl instead of hopping; raise the diameter to see the velocity grow linearly (myelinated) or with the square root (unmyelinated).
- Block the Na+ channels (tetrodotoxin): no spike. Block the Ca2+ channels (cadmium): spikes arrive but nothing is released.
- Set the train to 120 Hz: the quanta per spike fall as the pool empties (depression), but the post-synaptic potential still summates to threshold. Slow the recovery time to deepen the depression.
- Cool the nerve to 6.3 °C: the spike widens and conduction slows.
Loading model...
Loading Blender model...