Choose the light, then set aperture, shutter, ISO and focus. Watch the exposure meter (top right) and the sharp zone plot.
Exposure value. Aperture f/N and shutter time t give EVs = log2(N²/t). A scene lit to EV100 is exposed correctly when EVs = EV100 + log2(ISO/100). Each stop is a factor of 2 in light; reciprocity lets you trade stops between N, t and ISO.
Noise. Light arrives as photons, so counting noise is √n. Less light on the sensor (small aperture, short time) means lower signal-to-noise; raising ISO only amplifies the result. The simulation draws shot noise plus a small read noise, so a high ISO at night is visibly grainy.
Depth of field. Hyperfocal distance H = f²/(N c) + f with circle of confusion c = 0.03 mm (full frame, normal print). Focused at s, the sharp zone runs from s(H−f)/(H+s−2f) to s(H−f)/(H−s). The blur disc of an object at distance d is f²/(N(s−f)) · |d−s|/d.
Diffraction. Stopping down too far spreads light into an Airy disc of diameter 2.44 λ N (λ = 550 nm), so very small apertures soften even the focused plane. Hand-held shake blurs by about f · 0.02 rad/s · t on the sensor, roughly the old 1/focal-length rule.
Composition. The horizon slider moves the horizon off the middle; the stream is a leading line toward the lake and the thirds grid shows the usual placement rules (guidelines, not laws).
Honest simplifications. Five flat layers at fixed distances (3 m, 60 m, 400 m, 15 km, sky) stand in for a real scene; blur is a Gaussian, not real bokeh; no lens aberrations, vignetting or dynamic-range limits beyond clipping; the image is drawn at low resolution, so blur is shown with an adjustable pixel-peeping zoom (default 4x), while the depth-of-field numbers use the standard 0.03 mm criterion.