Ocean Dynamics Lab (3D)

A research vessel, weather buoy and CTD cast sit in a cutaway ocean: Airy waves with real dispersion, a UNESCO-density stratified water column and a wind-driven Ekman spiral.

Switch to 2D

Presets

Playback

Waves

Wind and Earth rotation

Stratification

View

Camera

Layers

Quality

Model check

The science

Surface gravity waves (Airy linear theory)

A small-amplitude wave of period T on water of depth h obeys the dispersion relation ω² = g k tanh(k h), solved here for the wavenumber k by Newton iteration. In deep water (kh > π) this gives L = gT²/2π and a phase speed that grows with period; in shallow water (kh < π/10) it gives c = √(g h). The group speed is cg = ½(1 + 2kh / sinh 2kh) c. Water particles move on ellipses with horizontal and vertical semi-axes a cosh k(h−d)/sinh kh and a sinh k(h−d)/sinh kh, shrinking with depth d and flattening to back-and-forth motion near the bed. Entering shallow water the wave keeps its energy flux cg H², so the height grows by the shoaling factor Ks = √(cg0/cg) until it reaches the breaking limit (about 0.78 h).

Thermohaline density

Seawater density comes from the UNESCO / EOS-80 polynomial (Millero & Poisson 1981) at surface pressure, i.e. the potential density σ0 = ρ − 1000. Temperature and salinity follow a mixed layer of depth Dm above a tanh-shaped thermocline/halocline of thickness Dt. The stability is the Brunt–Väisälä frequency N² = (g/ρ) dρ/dz (z measured downwards, so a stable column has N² > 0); a buoyancy period 2π/N of a few minutes is typical of a strong thermocline. The mixed-layer depth is the first depth where σ0 exceeds its surface value by 0.03 kg/m³. Cold, salty water is dense: this contrast, not the wind, drives the slow global thermohaline overturning.

Wind stress and the Ekman layer

Wind stress is τ = ρa Cd U² with ρa = 1.22 kg/m³ and a drag coefficient of 1.2×10−3 below 11 m/s, (0.49 + 0.065U)×10−3 above (Large & Pond 1981). With the Coriolis parameter f = 2Ω sin φ and a constant eddy viscosity Az, the horizontal current w = u + iv obeys i f w = Az wzz with ρ Az wz = τ at the surface. The solution is w = W0 eκ z, κ = a(1 ± i), a = √(|f|/2Az). The surface current is 45° to the right of the wind in the northern hemisphere (left in the southern), it decays and rotates with depth over the Ekman depth DE = π/a, and the depth-integrated transport τ/(ρ f) is exactly 90° to the right (left) of the wind, independent of Az.

What is simplified

  • Waves are linear and monochromatic; the shorter chop on the 3D surface is decoration and is not used in any number. The ship and buoy follow the surface with a simple strip-averaged hydrostatic response (amplitude filtered by sinc(kL/2)), not a full hull motion model; Stokes drift, wave breaking and wave–current interaction are not included.
  • The equation of state ignores pressure (potential density at p = 0) and uses a salinity in practical-salinity units; the profile shapes are idealised tanh profiles, not observations.
  • The Ekman layer uses a constant eddy viscosity and a steady wind over an infinitely deep ocean; real turbulent mixing, stratification inside the layer and the finite-depth case change the angle (typically 20–45°) and the depth. Latitudes closer than 5° to the equator are clamped because f vanishes there.
  • Currents are shown for the Ekman component only; geostrophic and tidal currents are not simulated.

In-page checks

(1) Newton and bisection solutions of the dispersion relation agree, the deep and shallow limits are recovered and the energy flux is conserved across depth. (2) The EOS-80 polynomial reproduces the published test value ρ(35, 5°C) = 1027.67547 kg/m³ and puts the fresh-water density maximum at 3.98°C. (3) The numerically integrated Ekman transport equals τ/(ρ f), the finite-difference residual of the governing equation is small, and the surface current sits 45° from the wind on the correct side.

Loading model...
Loading Blender model...
Wave speeds against water depth
Density profile and mixed layer
Ekman spiral (current hodograph)
Stability N2 against depth
Made with 🟠 Blender · Three.js