Glacier Overhang Cantilever (3D)

Undercutting lengthens an ice tongue until bending stress beats fatigue-weakened ice and it calves.

Switch to 2D

Presets

Playback

Parameters

Pick a preset or set your own, then watch the stress ratio climb to 100 %.

Camera

Layers

Quality

Model checks

The science

What is modelled

The ice tongue that sticks out past the glacier front is a cantilever beam fixed at the glacier and free at the tip. Its self-weight per metre is w = rho g B H (rho = 917 kg/m3, width B = 40 m, thickness H).

Equations

  • Root bending moment M = w L^2 / 2, section inertia I = B H^3 / 12.
  • Maximum tensile stress sigma = M (H/2) / I = 3 rho g L^2 / H (independent of B).
  • Tip sag delta = w L^4 / (8 E I) with E = 9 GPa (a few millimetres: elastic bending is invisible, the failure is brittle).
  • Snap length when sigma equals strength: L* = sqrt(sigma_s H / (3 rho g)).
  • Fatigue: damage D grows with warm ice (melt-water wedging) and with wave cycles; strength is sigma_s (1 - D), sigma_s = 1.2 MPa.

Simplifications

Real calving is three-dimensional and driven by crevasses, meltwater and buoyancy; this lab isolates the beam-bending mechanism. Ice is a homogeneous elastic beam with one tensile strength, and the damage rates are illustrative, not calibrated to a particular glacier. Three in-page checks compare the formulas with slice-by-slice numerical sums and double integration.

Loading model...
Loading Blender model...
Stress and strength over time
Stress versus overhang length
Snap length versus thickness
Made with 🟠 Blender · Three.js