Presets
Playback
Parameters
Camera
Layers
Quality
Model check
The science
What is modelled
Two fossil skeletons, a T. rex and a Triceratops, built bone by bone: every vertebra, rib, belly rib, hip bone, leg bone, toe and tooth is a separate named piece. Rebuild the skeleton from bones lying on the floor, explode it, click a bone to identify it, then ask the engineering question behind the shape: how thick must a thigh bone be to carry its animal, and where does the centre of mass sit over the feet?
Equations
- A hollow bone shaft has cross-section
A = π/4 (Do² − Di²)and second momentI = π/64 (Do4 − Di4). Hollow bone is stiffer per kilogram than a solid rod. - One femur carries
F = k m gwith k = 0.5 standing, 1.3 at the peak of a walking step and 2.5 running (half of that for the four-legged Triceratops). - Stress at mid-shaft:
σ = F/A + (F e) (Do/2) / I, with the load line offsete = 0.25 Lfrom the bowed shaft. Safety factorSF = σult / σwith σult = 170 MPa for compact bone in compression. - Galileo's square-cube law: mass grows as s³ but bone area as s², so with unchanged proportions the stress grows as s and the safety factor falls as 1/s. Constant stress needs
Do ∝ s1.5, which is why big animals have thick bones. - Euler buckling of the shaft as a pinned column:
Pcr = π² E I / L²with E = 17 GPa. - Centre of mass:
xcm = Σ mi xi / Σ miover head and neck, trunk, tail, hind limbs and forelimbs. The animal stands only when the centre of mass lies above the foot support between heel and toe; the tail balances the heavy front of a biped.
Checks run in the page
- The closed-form A and I of three hollow shafts are compared with an 800 x 800 grid integration of y² dA.
- The elastic-line equation EI y'' = −M(x) is integrated with RK4 and a shooting search, and the mid-span deflection of a centre-loaded beam is compared with F L³/(48 E I).
- The lowest eigenvalue of the finite-difference column equation (300 nodes, inverse iteration) is compared with the Euler load π² E I / L².
Honest simplifications
- The skeletons are plausible reconstructions, not scans of a museum mount: bone counts follow the real series (10 neck, 13 back and 5 to 8 hip vertebrae) but shapes are simplified.
- Body masses, mass shares of the segments and the shaft wall thickness are round estimates (real values differ by tens of percent). The femur is treated as a straight beam with one equivalent load offset; real bones are curved and loaded by muscles in many ways, so only the trends and orders of magnitude are meaningful.
- Bone strength is a single textbook value; there is no fatigue, no cartilage and no muscle forces.
What to try
- Press Auto-assemble: bones fly from the floor to their places, hips and legs first.
- Choose the isometric law and raise the size to 1.6: the safety factor drops from about 6 to about 3.5 in the walking case (graph 1). Switch to constant stress and it recovers.
- Use the preset Heavy head, no tail: the centre of mass slides beyond the toes and the animal tips forward (graph 3); with a normal tail it sits just in front of the hips.
Loading model...
Loading Blender model...