Presets
Playback
Glow network
Camera
Layers
Quality
Model check
The science
What is modelled
Fungal bioluminescence comes from an enzyme reaction: a luciferin is oxidised by oxygen with the help of a luciferase and gives off a photon. Each fruit body here is a light source whose relative emission L rises in a flash and then decays as the reagents are used up and regenerated. Flashes spread from body to body as a regenerative signal, like a wave in an excitable medium.
Equations
- Light decay:
dL/dt = -(L - L0) / tau, so after a flash of amplitude A the excess glow isA e^(-t/tau)and the total extra light isA tau. - Signal: a flashing body tells every neighbour within the range
rc; the message arrives afterd / v. A neighbour that is not refractory (refractory time = tau) flashes in turn, so the front moves at speed v. - Photon energy:
E = h c / lambda(about 1239.84 eV nm / lambda). Emitted power:P = Ndot * sum(L) * EwithNdot = 1e10photons per second for one full flash (illustrative, not measured). - Roof drips: a drop released from height H lands after
t = sqrt(2 H / g)and sets off the body it hits.
Checks run in the page
- Explicit-Euler integration (1 ms) of a flash gives an e-folding time equal to tau and a total light output equal to A tau within 1 %.
- Arrival times along a straight chain of 14 bodies give a fitted front speed equal to the set v within 2 %.
- A stepped free-fall matches
sqrt(2H/g), andh c / lambdafrom the SI constants matches 1239.84 / lambda.
Honest simplifications
Real fungi rarely signal to each other by fast waves: most glow steadily, with a day-night rhythm controlled by the circadian clock, and the 'drip triggers a flash' behaviour is invented for this model. The decay time, signal speed, coupling range and photon rate are illustrative, not fitted to a species. Cave rock, stalactites, mushrooms and glow strands were built in Blender and baked; light, halos, drops and spores are real time. Light from a point light stands in for the true diffuse illumination.
What to try
- Click one fruit body and watch graph 3: the dots follow the dashed line d = v t.
- Shrink the range to 1 m: the wave stops at the gaps between clusters.
- Set tau to 8 s: flashes overlap and the cave stays bright; set it to 0.5 s for sparkles.
- Change the colour: the photon energy and power readouts change with wavelength.
- Use Looking up to see the strands and stalactites.