Presets
Playback
Vapour and attachment
rho is the surrounding vapour; gamma controls how fast the crystal surface takes water.
Grid and growth
Tank size, speed, boundary and seed.
Display
Colour the crystal by age or look at the vapour field.
Layers
Model checks
The science
Reiter's cellular model
The crystal lives on a hexagonal lattice. Each cell holds a water mass s (vapour or ice). A cell is ice once s >= 1; a cell is receptive if it is ice or touches ice. Each step: (1) receptive cells keep their water (v), other cells hold diffusing vapour (u); (2) the vapour relaxes towards its six neighbours, u' = u + (alpha/2) (mean of 6 neighbours - u); (3) receptive cells gain a little vapour gamma (the surface takes water from the humid air nearby); (4) s' = u' + v + gamma. Because only the non-receptive cells diffuse, ice acts as a sink: the vapour next to a growing tip is depleted, which makes the tips run ahead and the sides lag behind.
Diffusion coefficient of the rule
For unit lattice spacing the six-neighbour mean exceeds the centre value by (1/4) laplacian(u), so one step changes u by (alpha/8) laplacian(u): D = alpha / 8 cells^2 per step. The mean-square spread of a unit pulse after n steps is <r^2> = 4 D n = alpha n / 2. The first check measures exactly that on the grid.
Mass balance and symmetry
The diffusion and attachment steps conserve water; the only source is gamma per receptive cell per step, so in a closed tank M(t) = M(0) + gamma x (sum of receptive cells). Both the lattice and the update rule are invariant under 60 degree rotations and mirror reflections, so without noise the crystal is perfectly six-fold symmetric; noise sigma multiplies vapour by 1 +- sigma and breaks the symmetry on purpose, which is why no two snowflakes are alike.
Morphology
Low background vapour rho and small gamma give thin branching dendrites (diffusion-limited growth, like the Mullins-Sekerka instability); large gamma makes the surface fill in so plates and sectored plates appear; large rho gives broad stars. In nature the same switch is made by temperature and humidity (the Nakaya diagram: plates near -2 C and -15 C, columns near -5 C, dendrites at high supersaturation near -15 C).
Honest simplifications
It is a two-dimensional, qualitative model: no real units, no latent-heat diffusion, no anisotropic surface energy and no thickness, so cell counts are not micrometres. In the 3D view the plate thickness is a visual profile (thicker in the middle) and the crystal is shown magnified; neither is computed. The parameters rho and gamma are not mapped to a particular temperature.
What to try
- Start with Stellar dendrite, then raise gamma towards 1e-1.5 and watch the branches fill into a plate.
- Lower rho: the arms get thinner and the side branches wider apart (stronger vapour depletion).
- Add noise sigma = 0.003 and press New noise seed: every crystal differs, while the symmetry-defect readout stays at zero without noise.
- Switch the boundary to a closed tank: growth slows as the vapour is used up (see the water-mass graph).
- Use the vapour-field view to see the depleted halo around each tip.