Dried suspensions of cellulose nanocrystals (CNCs) don't just dry flat — the negatively charged rods self-assemble into a chiral nematic (cholesteric) liquid-crystalline structure. Within each thin layer the rods line up roughly parallel, but each successive layer's average orientation is twisted by a small angle relative to the one below, so the director sweeps out a left-handed helix as you move up through the film. The distance over which it completes one full 360° twist is the helical pitch P.
Bragg condition: λ = n̄ · P · cos(θ)
n̄ = average refractive index of the film
P = helical pitch (twist period)
θ = angle of the incident/viewing light from the film normal
When P is on the order of a few hundred nanometres — comparable to the wavelength of visible light — the periodic helix acts as a Bragg mirror and reflects one narrow band of colour with no pigment at all: this is structural colour, the same principle behind beetle shells and opal. Because the helix is left-handed, it only reflects left-circularly-polarized light, capping the peak reflectance near 50%; the rest of the light passes straight through.
- Ionic strength — added salt screens the electrostatic repulsion between charged CNC rods during drying, letting them pack into a tighter helix. Higher ionic strength → shorter pitch P → the reflected colour blue-shifts.
- Refractive index n̄ — the film's average index (cellulose plus any residual water/matrix) scales λ directly through the Bragg law.
- Viewing angle θ — tilting the sample (or your eye) shortens the effective optical path, so λ = n̄P·cosθ drops and the colour blue-shifts at grazing angles — the classic iridescent "colour-shift" you see in a mother-of-pearl or a nanocellulose film tilted in your hand.
This is a real, exploited effect: evaporation-induced CNC films are used to make pigment-free, biodegradable structural-colour coatings, anti-counterfeiting labels and sensors whose colour reports back the ionic strength or humidity of their environment.