Controls
Presets
Parameters
Quality
Camera
Model checks
The science
Why cones reflect less. A flat glass surface reflects R = ((1 - ns)/(1 + ns))2 (4.3 % at ns = 1.52) because the refractive index jumps from 1 to ns within a fraction of a wavelength. A hexagonal array of sub-wavelength cones, as on the corneas of moth eyes, makes the index rise gradually: at depth d below the tips the cones fill a fraction f(d) = (d/h)q of the area (q = 2 for a cone, 1 for a paraboloid), and a wave that cannot resolve the individual cones sees an effective medium. A smooth ramp longer than about half a wavelength has almost no reflection at any colour, while a single quarter-wave film is perfect at one wavelength only.
Model. Effective index neff(d)2 = 1 + f(d)(ns2 - 1) (linear mixing of permittivity, the Wiener upper bound), 60 thin layers, normal incidence, and the transfer-matrix method: each layer is M = [[cos d, i sin d / n],[i n sin d, cos d]] with d = 2 pi n t / lambda; with [B, C] = M[1, ns], r = (B - C)/(B + C), R = |r|2, T = 4 ns/|B + C|2.
Simplifications. The substrate is a semi-infinite, loss-free, dispersion-free medium (the default 1.52 is a nominal crown-glass value, 3.5 is an illustrative silicon-like number, not a measured spectrum), so there is no absorption, no back-surface reflection, one polarisation at normal incidence, and no angle dependence. The zero-order effective-medium picture needs p < lambda/ns; for coarser arrays diffraction orders appear and the model becomes optimistic (the page flags it). Real moth-eye films also lose a little light to scattering from imperfect cones. Checks: bare interface versus Fresnel; quarter-wave film versus its closed form; thin film versus the Airy summation; R + T = 1 and reciprocity of the transmittance through the reversed stack; convergence with the number of layers.