Gold Nanosphere Photothermal Lab

Plasmon absorption and the temperature halo around a laser-heated nanoparticle.

Switch to 2D

Presets

Playback

Particle

Size of the gold sphere and the medium around it.

Laser

Wavelength and intensity of the illuminating beam.

Time

Heat spreads in nanoseconds; slow it down to watch the halo build.

Camera

Quality

Layers

Model checks

The science

Plasmon resonance

Conduction electrons in gold respond to light like a Drude gas: eps(w) = eps_inf - wp^2 / (w^2 + i gamma w) with hbar wp = 9.03 eV, eps_inf = 9.84 and a damping that grows as the sphere shrinks, gamma = gamma_bulk + hbar v_F / R (surface scattering). A sphere much smaller than the wavelength acts as a point dipole with polarisability alpha = 4 pi R^3 (eps - eps_m) / (eps + 2 eps_m); the absorption cross-section is sigma_abs = k Im(alpha) and the scattering one k^4 |alpha|^2 / 6 pi, k = 2 pi n_m / lambda. The peak sits where Re eps = -2 eps_m (the Frohlich condition), so a higher refractive index of the surroundings red-shifts it: the basis of plasmonic sensing.

Heating

The absorbed power is P = sigma_abs I. In steady state heat leaves by conduction and the temperature rise is dT(r) = P / (4 pi kappa r), so at the surface dT = sigma_abs I / (4 pi kappa R). Because sigma_abs grows like R^3, the surface heating grows like R^2. For a laser pulse switched on at t = 0 the point-source solution dT = P / (4 pi kappa r) erfc(r / 2 sqrt(D t)) shows the halo growing outwards on the time scale r^2 / D (picoseconds to nanoseconds).

Simplifications

The dielectric function is Drude only: gold's interband transitions, which add absorption below about 500 nm and move the real peak to about 520 nm in water, are left out, so absolute values are illustrative. The quasi-static dipole picture is accurate for radii up to roughly 20 nm; radiative damping and retardation are ignored for larger spheres. Thermal properties are those of water, constant, the particle is treated as a point heat source for the transient, and nothing boils (real laser heating of nanoparticles can form nanobubbles).

What to try
  1. Slide the laser wavelength across the peak at about 500 nm: the heating rises sharply on resonance and almost vanishes at 700 nm.
  2. Press the small 5 nm particle: damping broadens the peak and absorption collapses (cross-section scales with volume).
  3. Compare air, water and oil as the surroundings: the plasmon peak red-shifts as the index rises.
  4. Watch the temperature halo in the pulse: it builds in about 1 ns and relaxes when the laser is off; the steady curve falls as 1/r.
  5. Raise the laser intensity: the temperature rise grows linearly with it.
Loading Blender model...
Absorption and scattering spectrum
Temperature rise against distance from the particle
Steady surface temperature rise against radius
Plasmon peak against refractive index of the medium
Made with 🟠 Blender · Three.js