Presets
Playback
Channel
Gap height and the Navier slip length of the walls.
Driving pressure
Pressure drop applied over a 10 micrometre long channel.
Time
Real tracers cross the window in nanoseconds; slow them down to watch them.
Layers
Model checks
The science
Flow between two plates
For a slit of height h and a pressure gradient G = -dp/dx the Stokes equation is eta u'' = -G. Classical (no-slip) flow gives the parabola u = G y (h - y) / 2 eta and a flux per unit width Q0 = G h^3 / 12 eta.
Navier slip
On very smooth hydrophobic walls such as graphene the water does not stick: the wall speed is proportional to the local shear, u(wall) = b du/dy, with a slip length b (tens of nanometres for graphene; molecular dynamics and experiments disagree by large factors). The profile becomes u = G [y (h - y) + b h] / 2 eta, a parabola lifted by a uniform wall speed G b h / 2 eta, and the flux becomes Q = Q0 (1 + 6 b / h). For h = 10 nm, b = 30 nm the flux is 19 times larger than classical; for a 300 nm gap the gain is only a few percent. The wall shear stress G h / 2 does not depend on b.
Tracers
Tracer molecules diffuse with the Stokes-Einstein coefficient D = k_B T / 6 pi eta a (a = 1 nm) between reflecting walls and are advected by u(y). Averaged over a uniform distribution their mean speed is Q / h, which is what the Monte Carlo check tests. The Peclet number Pe = u h / D tells whether advection or diffusion dominates, and the Reynolds number shows that the flow is far into the creeping regime.
Simplifications
Newtonian water at 300 K with constant viscosity down to 5 nm (real water layers near walls are structured), a single constant slip length independent of pressure and shear, no electrokinetic effects, no entrance losses (the pressure drop is applied over a fixed 10 um), no x diffusion of tracers in the animation. Time is dilated because the real flow crosses the window in nanoseconds.
What to try
- Press "No slip": the profile is a parabola that vanishes at both walls, and the flux enhancement reads 1.000.
- Set the gap to 10 nm with b = 30 nm: the profile is almost flat (plug-like) and the flux is 19 times the classical value.
- Widen the channel to 300 nm at the same b: slip now changes the flux by only a few percent.
- Raise the pressure drop: the speed scales linearly and the enhancement does not change.
- Watch the yellow tracers: they stay uniformly spread between the walls while being carried at the mean speed Q/h.