Presets
Playback
Particle
Size of the gold sphere and the medium around it.
Laser
Wavelength and intensity of the illuminating beam.
Time
Heat spreads in nanoseconds; slow it down to watch the halo build.
Layers
Model checks
The science
Plasmon resonance
Conduction electrons in gold respond to light like a Drude gas: eps(w) = eps_inf - wp^2 / (w^2 + i gamma w) with hbar wp = 9.03 eV, eps_inf = 9.84 and a damping that grows as the sphere shrinks, gamma = gamma_bulk + hbar v_F / R (surface scattering). A sphere much smaller than the wavelength acts as a point dipole with polarisability alpha = 4 pi R^3 (eps - eps_m) / (eps + 2 eps_m); the absorption cross-section is sigma_abs = k Im(alpha) and the scattering one k^4 |alpha|^2 / 6 pi, k = 2 pi n_m / lambda. The peak sits where Re eps = -2 eps_m (the Frohlich condition), so a higher refractive index of the surroundings red-shifts it: the basis of plasmonic sensing.
Heating
The absorbed power is P = sigma_abs I. In steady state heat leaves by conduction and the temperature rise is dT(r) = P / (4 pi kappa r), so at the surface dT = sigma_abs I / (4 pi kappa R). Because sigma_abs grows like R^3, the surface heating grows like R^2. For a laser pulse switched on at t = 0 the point-source solution dT = P / (4 pi kappa r) erfc(r / 2 sqrt(D t)) shows the halo growing outwards on the time scale r^2 / D (picoseconds to nanoseconds).
Simplifications
The dielectric function is Drude only: gold's interband transitions, which add absorption below about 500 nm and move the real peak to about 520 nm in water, are left out, so absolute values are illustrative. The quasi-static dipole picture is accurate for radii up to roughly 20 nm; radiative damping and retardation are ignored for larger spheres. Thermal properties are those of water, constant, the particle is treated as a point heat source for the transient, and nothing boils (real laser heating of nanoparticles can form nanobubbles).
What to try
- Slide the laser wavelength across the peak at about 500 nm: the heating rises sharply on resonance and almost vanishes at 700 nm.
- Press the small 5 nm particle: damping broadens the peak and absorption collapses (cross-section scales with volume).
- Compare air, water and oil as the surroundings: the plasmon peak red-shifts as the index rises.
- Watch the temperature halo in the pulse: it builds in about 1 ns and relaxes when the laser is off; the steady curve falls as 1/r.
- Raise the laser intensity: the temperature rise grows linearly with it.