Copper Nanowire Resistivity Size Effect (2D)

Cross-section with electron paths, and a clickable map of resistivity against line thickness and grain size.

Switch to 3D

Readouts

Presets

Line

Top: side cross-section of the line between two probes (Blender-rendered grain texture, electron and probe tip); white trails follow 10 tracer electrons, red lines are grain boundaries. Bottom: resistivity map; click or drag on it to set thickness and grain size.

Independent numerical checks

The science

Conduction electrons in copper are scattered about every λ = 39 nm (a typical room-temperature mean free path, quoted from memory). In a line not much thicker than λ they also hit the surfaces, and a polycrystalline line has grain boundaries that reflect part of the current. Both add resistance, so a 20 nm line is clearly more resistive than bulk copper (about 1.7 µΩ·cm): one of the real limits of chip wiring.

Surface (Fuchs–Sondheimer). For thickness t, k = t/λ and specular fraction p: σ/σ0 = 1 − (3/2k)(1 − p) ∫1∞ (1/x³ − 1/x⁵)(1 − e−kx)/(1 − p e−kx) dx (Simpson). Grain boundaries (Mayadas–Shatzkes). With α = (λ/dg) R/(1 − R): ρ0/ρMS = 3[1/3 − α/2 + α² − α³ ln(1 + 1/α)]. Combining (Matthiessen): ρ/ρ0 = ρMS/ρ0 + ρFS/ρ0 − 1. The map evaluates exactly this over the whole (t, dg) plane: because FS depends only on t and MS only on dg, the map is a sum of two one-dimensional curves, so it shows at a glance which mechanism dominates (vertical colour bands: surfaces; horizontal bands: grains). Contour lines are drawn at ρ/ρbulk = 1.5, 2, 3, 5, 10.

The electron gas. 600 classical electrons move at unit speed in a periodic box of the chosen thickness (the 3D page's model, unchanged; this view projects it onto the x-y plane). They scatter in the bulk with probability dt/τ per step, reflect at the surfaces (specular with probability p, else diffuse) and at grain planes (probability R). A small force along x gives a drift that, divided by the drift of a bulk reference run, measures σ/σ0.

Checks. FS integral against a Green–Kubo Monte Carlo (200,000 paths); MS against a Monte Carlo of its own model and against explicitly reflecting planes (MS is an approximation; the real gap is shown); thick-film limit; small-α series; the live gas drift against the Matthiessen sum (tolerance grows when both mechanisms are strong); and, new for this view, the map against the closed form at the marked point, a bisection solve of the ρ/ρbulk = 2 contour verified by substitution, and monotonicity of every map cell.

Not modelled. Square-wire side walls (the line is a film of thickness t), quantum or full Fermi-surface effects, temperature dependence of λ, barrier layers, grain-orientation distributions, defects, impurities and electromigration. Values (ρ0 = 1.68 µΩ·cm, λ = 39 nm, typical p and R) are typical numbers from memory. The cross-section is vertically exaggerated for thin lines (marked on screen). Educational model only.

Grain texture, electron and probe sprites: Blender (Cycles) renders of the 3D page's models.

ρ/ρbulk against thickness: surface (blue), grains (yellow), total (green), Monte Carlo (dots)
Live gas drift / bulk reference (blue) against the Matthiessen value (yellow)
Made with 🟠 Blender