Aerobic microbes need a continuous supply of dissolved oxygen (DO). A stirred-tank bioreactor supplies it by sparging air bubbles and agitating the broth with an impeller — together these set a mass-transfer coefficient, kLa, that caps how fast oxygen can dissolve into the liquid: OTRmax = kLa × (C* − CL), where C* is the oxygen saturation concentration.
As the population (biomass, X) grows, its oxygen uptake rate (OUR = qO2 × X) rises with it. While the reactor's maximum oxygen-transfer rate (OTRmax) stays above OUR, dissolved oxygen stays near saturation and growth is exponential. Once OUR catches up to the kLa-limited OTRmax ceiling, dissolved oxygen collapses toward zero, aerobic growth stalls, and the culture shifts to anaerobic (fermentative) metabolism, accumulating a byproduct (lactate) instead of new biomass.
Pick a capacity preset (Weak / Standard / High-capacity aeration+agitation) and fine-tune the exact kLa transfer-rate ceiling with the slider. A higher ceiling raises OTRmax, letting the population grow larger before dissolved oxygen collapses. Drag to orbit the camera, scroll to zoom, and use Pause/Reset to control the run.
Industrial fermenters can reach kLa values of 200–500 per hour through vigorous agitation and pressurized aeration — precisely because oxygen transfer, not nutrients, is usually the first physical limit an aerobic culture hits as it scales up.
Grow a microbial culture in a 3D bioreactor and watch dissolved oxygen collapse once population oxygen demand outruns the reactor's fixed oxygen-transfer capacity, forcing anaerobic byproduct accumulation and stalling growth.
The reactor's aeration and agitation set a fixed mass-transfer coefficient, kLa, which caps how fast oxygen can dissolve into the broth (OTRmax = kLa × C*). As the microbial population grows, its oxygen demand (OUR) eventually exceeds that ceiling, dissolved oxygen collapses, and the culture is forced into anaerobic, byproduct-producing metabolism.
Choose a Weak, Standard, or High-capacity O2-transfer preset, then fine-tune the exact transfer-rate ceiling (kLa) with the slider — a higher ceiling lets the population grow larger before dissolved oxygen runs out. Drag to orbit the camera and scroll to zoom; use Pause/Reset to control the run.
Industrial fermenters push kLa values of 200–500 per hour through vigorous agitation and pressurized aeration — oxygen transfer, not nutrient supply, is usually the first physical wall an aerobic culture hits as a process scales up.