GGALVANICCORROSION OBSERVATORY
7 connected modulesStatic package
MYSIMULATOR · SCIENTIFIC SIMULATION FAMILY

Understand why metals corrode when they touch.

Explore galvanic coupling, mixed potentials, electrode-area effects and sacrificial protection through seven complementary laboratories powered by one shared scientific engine.

ElectrochemistryMaterials engineeringFaraday's lawInteractive experiments
ANODE → ELECTRON FLOW → CATHODE

Simulation family

Choose a laboratory to begin
01 / VISUAL LAB

Cross-section Laboratory

Inspect an electrochemical cell, follow electron flow and observe anodic metal dissolution in an electrolyte.

OPEN LABORATORY →
02 / ANALYTICAL LAB

Analytical Graph Laboratory

Read anodic and cathodic Tafel branches and locate the mixed-potential operating point.

OPEN LABORATORY →
03 / TIME EXPERIMENT

Experiment Laboratory

Run a time-based corrosion experiment, collect samples and track accumulated metal loss.

OPEN LABORATORY →
04 / SCENARIO STUDY

Comparison Laboratory

Compare the baseline with saltwater, protective coatings and altered electrode-area ratios.

OPEN LABORATORY →
05 / MATHEMATICS

Mathematical Model Explorer

Sweep cathode-to-anode area ratio and investigate how polarization slopes shift the mixed potential.

OPEN LABORATORY →
06 / APPLIED TASKS

Challenge Mode

Solve practical protection challenges by adjusting materials, coatings and electrolyte conditions.

OPEN LABORATORY →
07 / DATA SCIENCE

Data Analysis & Report

Build a measurement set, analyse trends, inspect summary statistics and export your data.

OPEN LABORATORY →
All laboratories share the same scenario. Change the material pair or environmental conditions in one module, then open another module to investigate the same experiment from a different scientific perspective.

Model scope: educational mixed-potential Tafel approximation and Faraday-law metal-loss calculations. This is not a corrosion design code, materials certificate or safety assessment.

Made with 🤖 ChatGPT