3D Ferrofluid Spikes: Rosensweig Instability over a Magnet

Bring a magnet toward a dish of ferrofluid and watch the flat surface break into a hexagonal lattice of spikes once the field passes the critical value.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What you see. A ferrofluid is a suspension of ~10 nm magnetite grains in oil, so it behaves as a liquid with a large magnetic permeability. Above a magnet, the field pulls fluid toward the strongest field and heaps it up. Past a threshold field the flat surface becomes unstable and breaks into a hexagonal lattice of spikes: the Rosensweig (normal-field) instability.

Threshold. For a linearly magnetisable fluid (relative permeability μr) with a normal induction B, surface waves of wavenumber k obey ρω² = ρgk + σk³ − k²(μr−1)²B² / (μ0μr(μr+1)) (Cowley & Rosensweig, 1967). The field term is negative, so a mode grows when B exceeds B(k)² = μ0μr(μr+1)/(μr−1)² · (ρg/k + σk). The lowest point of that curve is the critical field Bc² = 2μ0μr(μr+1)/(μr−1)² · √(ρgσ) at kc = √(ρg/σ), i.e. a wavelength λc = 2π√(σ/ρg) of about 1 cm for a kerosene-based fluid. Three plane waves at 60° superpose to hexagonal peaks with nearest-neighbour spacing 2λc/√3. Low gravity (Moon, near weightlessness) widens the pattern; high surface tension does too.

The magnet. A uniformly magnetised disc is equivalent to a current sheet K = Br/μ0 on its side wall. The field on the fluid plane comes from a numerical Biot–Savart sum over 14 ring currents, so it falls off radially and spikes only form inside the radius where B ≥ Bc. The heap under the magnet comes from the linear-fluid normal traction (μr−1)B²/(2μ0μr) balanced by ρgh.

Honest simplifications. Linear magnetisation (real fluids saturate, which raises the threshold at large fields); a deep, laterally uniform layer (the real layer is 5 mm deep and the field decays across it); the field is not re-computed from the deformed surface. The onset in real fluids is subcritical with hysteresis (spikes persist when the field is lowered below Bc); this model switches on and off at Bc. Spike height is schematic (grows like √(B²/Bc² − 1) and is capped), the hump is clipped to conserve the fluid volume, and the animation is a viscous relaxation, not a time-dependent solution of the Navier–Stokes equations. The presets use plausible round numbers, not a particular product.

Checks. (1) numerical scan of the neutral-stability curve against the closed-form Bc and kc; (2) the same length scale for water gives the tabulated 2.7 mm capillary length; (3) the ring-current field against the exact on-axis disc formula; (4) the lattice spacing of the pattern used for the mesh.

Loading model...
Loading Blender model...
Magnet field across the dish against the critical field
Field needed to grow each wavenumber (neutral stability)
Critical field against fluid permeability
Made with 🟠 Blender · Three.js