Lighting the burner…
🏭 Kiln controls
2D profile lab with the Arrhenius and Boudouard graphs →
The science

The chemistry. Celestite (SrSO₄) is turned into strontium sulfide (the “black ash”, the usual first step towards strontium carbonate) by hot carbon: SrSO₄ + 2C → SrS + 2CO₂, but at kiln temperature the carbon also converts CO₂ by the Boudouard reaction C + CO₂ ⇄ 2CO, so the net reaction is close to SrSO₄ + 4C → SrS + 4CO. The CO share follows K = pCO²/pCO2 with ΔG° = 170.7 − 0.1745 T kJ/mol; carbon used per sulfate is 2 + 2ψ. The net reaction is strongly endothermic (about +540 kJ/mol from rounded formation enthalpies).

The kiln. A rotating, slightly tilted drum moves the bed by π D tanβ / sinθr per turn (rolling bed, thin-bed approximation), so τ = L sinθr / (π D N tanβ) (about 34 min here; the common rule of thumb 0.19 L/(N D S) agrees within 4 %). The bed temperature chases the counter-current gas: dT/dt = (Tgas(x) − T)/th, with th growing with the bed fill. Conversion follows a contracting sphere, 1 − (1 − X)1/3 = k t, k = A e−Ea/RT / r0; carbon can run out, and a too-full bed (more than about 15 %) heats slowly.

Illustrative parameters. Ea = 210 kJ/mol, A = 8.1 m/s, gas profile, heating time 240 s at 10 % fill and the 4.4 mol/mol carbon ratio are chosen to give a plausible kiln, not fitted to a plant. Real plants differ in coal reactivity, ore grade, kiln geometry and gas-solid contact.

Honest simplifications. Plug flow; one grain size; no gangue chemistry, no melting or sintering, no SrS reoxidation, no heat-loss or flame model; the burner-end gas temperature is set directly; the drawing is a fixed 10 m schematic (the length slider changes the numbers only); the bed colour shows conversion (pale ore to black ash), the glow shows temperature. The kiln, hopper, hood and piers are a Blender model carrying no data. This is chemistry-engineering education, not a process recipe.

Independent checks (run on load; the same core drives the 2D page):

running…

-

Residence time-
Bed fill-
Sulfate converted-
SrS made-
Carbon used / fed-
Off-gas CO / CO₂-
Reaction heat demand-
Bed leaves at-
bed Tgas Tconversion; along the drum
Drag to orbit. Change the burner temperature, drum speed or carbon and watch the bed turn black.
Made with 🟠 Blender · Three.js