Composite Materials: Laminate Cross-Section (2D)

Ply stack, stress through the thickness, stiffness polar plot and the Tsai-Hill failure envelope.

Switch to 3D

Presets

Laminate

Beam and load

Numerical checks
The science

Ply to laminate

Fibre and matrix give ply properties (E₁ = VfEf + (1-Vf)Em, Halpin-Tsai for E₂ and G₁₂). A ply at angle θ has stiffness Q̄(θ); the laminate sums plies into A, B, D and the beam bending stiffness is EI = b / S44 from the inverse of the full 6x6 matrix.

What each view shows

  • Root section: strain is linear through the thickness, but stress jumps at each ply boundary because stiff 0° plies carry far more stress than 90° plies.
  • Stiffness polar: in-plane modulus E(φ) of the laminate (pink) against a single ply (grey); a quasi-isotropic stack is nearly circular.
  • Failure envelope: the Tsai-Hill ellipse in the fibre-axis stress plane (σ₁, σ₂); a ply fails when its point reaches the ellipse. Points are drawn for each ply at the clamped root (shear ignored in the plot, included in the index).

Honest simplifications

  • Small-deflection linear theory; displayed shape scaled above L/2 deflection.
  • Illustrative strengths of the same order as published carbon, glass and aramid epoxy data.
  • No delamination, free-edge, moisture or fatigue modelling.