Kick Physics Lab (2D)

Two-segment leg, torque pulses, impact impulse on a hanging pad or ball.

Switch to 3D

Presets

Playback

The kick

Torque scale for the muscles and the timing of the knee snap.

Target

A hanging training pad or a ball; mass, distance, restitution and contact time.

Layers

Model checks

The science

What is modelled

A sports-biomechanics model of a front kick on an inanimate training pad (or a ball on a tee). The kicking leg is two rigid segments in a plane: the thigh (8 kg, 0.44 m) and the shank with foot (4.6 kg, 0.52 m to the toe), each treated as a uniform rod with moment of inertia m l^2 / 12 about its centre. Hip and knee are driven by torque pulses that stand in for the muscles; there is no ragdoll and no body contact.

Equations of motion

With angles a (thigh) and b (shank) from the downward vertical, the Lagrangian gives M11 a'' + M12 b'' + c sin(a-b) b'^2 + G1 = tau_hip - tau_knee and M12 a'' + M22 b'' - c sin(a-b) a'^2 + G2 = tau_knee, with M11 = I1 + m1 l1^2/4 + m2 l1^2, M12 = c cos(a-b), M22 = I2 + m2 l2^2/4, c = m2 l1 l2 / 2. They are integrated with RK4 in steps of 0.5 ms. The kick is a short hip pulse followed, after the chosen delay, by a knee-extension pulse: the classic hip-first, snap-last pattern that lets the shank whip forward.

Torque and angular momentum

About the hip axis the angular momentum of the whole leg is L = (M11 a' + M12 b') + (M12 a' + M22 b') and obeys dL/dt = tau_hip + tau_gravity; the knee torque is internal and cancels. The third graph plots L together with the running integral of the hip plus gravity torque (the angular impulse), and a model check compares them.

Impact impulse and restitution

The toe hits the target in a collision with coefficient of restitution e. At the toe the leg behaves as an effective mass m_eff = 1 / (n^T J M^-1 J^T n) along the contact normal n (J is the toe Jacobian). Momentum conservation and the restitution definition give the impulse J = (1 + e) v_rel / (1/m_eff + 1/m_target), so the target leaves with v = J / m_target (J = m dv) and the leg loses J of momentum along n. Heavy targets slow the toe more; a light ball takes almost (1 + e) v. The average force shown is J divided by the contact time you choose (real pad contacts last roughly 5-20 ms).

Pad swing and the ball

The pad hangs from a rigid 1.5 m hanger as a pendulum; after the hit it swings to cos(theta_max) = 1 - v^2 / (2 g L), which the integration reproduces. The ball flies as a projectile (optional quadratic air drag); without drag the range follows x = v cos(theta) t with t = [v sin(theta) + sqrt(v^2 sin^2(theta) + 2 g y0)] / g.

Simplifications

Planar motion, rigid uniform segments, instantaneous impact, pad as a point mass on a hanger whose face stays vertical, no friction at the foot, hip fixed in space (no body movement or support-leg push). Peak foot speeds here are those of a recreational adult (about 10 m/s); trained athletes reach well above that using whole-body motion that this model leaves out. Educational physics only: the target is an inanimate pad or ball.

What to try
  1. Front snap kick: look at the toe speed graph; the speed peaks just before the leg is straight, which is why the pad sits at 80 cm. Move the pad closer or further and watch J change.
  2. Delay of the knee: set 0 ms (push kick) versus 60 ms (snap). The snap gives a higher toe speed but needs more precise timing.
  3. Heavy bag (80 kg): the pad barely moves, the toe slows more (J is larger, the pad speed J/m smaller).
  4. Light bouncy pad (10 kg, e = 0.8): the pad flies away faster than the toe was moving.
  5. Football on a tee: with drag off the ball follows an exact parabola; switch drag to 1 and watch the range shrink.
Joint angles against time
Toe speed against time
Angular momentum of the leg and angular impulse
Pad swing angle, or ball trajectory