Live Instruments SI UNITS
Estimated axial thrust
0.0kN
Motor torque capacity0%
Inspect Selected Component
Select a 3D component
Tap or click the propeller, duct, pod, steering bearing, gears, or structural supports for engineering notes.
Physical Model
A quasi-steady propeller-coefficient model estimates axial force and resisting torque. Angular acceleration follows shaft torque and an effective rotational inertia. Blade pitch and steering use rate-limited actuators.
Reference Configuration
Propeller diameter 2.65 m · Seawater density 1,025 kg/m³ · Five controllable-pitch blades · 5,000 kg·m² effective rotary inertia · 90 kN·m torque limit.
Model Scope
Coefficient curves are illustrative and not manufacturer performance data. Cavitation, blade-resolved CFD, vessel resistance, and transient wake turbulence are not solved.
Technical FAQ
1. What is an azimuth thruster?
An azimuth thruster is a steerable propulsion unit that rotates its submerged pod around a vertical axis. Its propeller can direct thrust over a wide range of headings, reducing dependence on a separate rudder for maneuvering.
2. How does controllable blade pitch work?
Each blade pivots at its root around a radial spindle. Changing the blade angle alters the axial momentum it imparts to the surrounding water. This design can reverse thrust while keeping the shaft rotating in the same direction.
3. What does the propeller advance ratio measure?
The advance ratio J is inflow velocity divided by shaft revolutions per second multiplied by propeller diameter. It expresses how rapidly water approaches the rotor relative to blade rotation and changes the estimated thrust coefficient.
4. How is propeller thrust calculated here?
The model uses T = ρ n² D⁴ Kₜ, where ρ is water density, n is revolutions per second, D is propeller diameter, and Kₜ is an illustrative function of pitch and advance ratio. This is an educational approximation rather than a calibrated performance chart.
5. Why does torque increase as RPM rises?
Hydrodynamic torque is estimated using Q = ρ n² D⁵ Kᵩ. For unchanged blade pitch and advance ratio, that makes resisting torque grow approximately with the square of shaft speed, while the associated power grows approximately with the cube.
6. What does the Kort nozzle do?
The surrounding duct can modify local water pressure and momentum, potentially helping bollard-pull performance. Its geometry is represented in detail here, but additional duct-produced thrust is not independently computed by the simplified force model.
7. Why does steering take time?
A real azimuth bearing must turn a heavy submerged assembly against friction, water forces, and drive limits. This model represents the delay with a maximum angular slew rate, rather than instantly applying the new heading.
8. Is the animated wake a CFD simulation?
No. Wake points and diagnostic rings are visual tracers moved with speeds based on the modeled induced velocity. They communicate flow direction and relative intensity but do not solve Navier–Stokes equations or predict detailed turbulence.
9. What happens with negative blade pitch?
Negative pitch changes the sign of the estimated propeller loading under suitable operating conditions, so the thrust readout can become negative. The wake visualization then redirects upstream while the shaft can continue rotating forward.
10. What are the main physical limitations?
The exhibit excludes cavitation, ventilation, blade elasticity, turbulent losses, detailed inflow angle, and vessel acceleration. The empirical coefficients, motor response, and inertia are illustrative and should not be used for engineering certification or equipment sizing.