Sourdough Bakery (3D)

Let the dough rise in the bowl, test it, put it in the stone oven and watch the heat reach the core while the crust browns.

Switch to 2D

Presets

Playback

Kitchen and oven

Camera

Layers

Quality

Model check

The science

What you are looking at

A sourdough starter is a living culture of wild yeast and lactic-acid bacteria. Mixed into dough, the yeast eats sugars and releases carbon dioxide, which the stretchy gluten network traps: the dough rises. The bacteria make lactic and acetic acid, so the pH falls and the flavour sharpens. In the oven, heat travels inward from the crust, the gas expands, the crumb sets (starch gelatinises and proteins coagulate) and the crust browns.

Equations

  • Yeast population (fraction of its plateau): logistic growth dN/dt = mu N (1 - N), solved exactly: N(t) = 1 / (1 + c e^(-mu t)), c = (1 - N0) / N0. The starting population N0 grows with the starter percentage.
  • CO2 produced: G(t) = q * integral of N dt = (q / mu) ln((e^(mu t) + c) / (1 + c)); dough volume V / V0 = 1 + 0.9 G (90 % of the gas is retained) up to about 2.6x, after which the gluten tears and the loaf collapses.
  • Temperature dependence (Arrhenius, with heat inactivation of the yeast above about 38 C): k(T) ~ exp(-Ea / R T) / (1 + exp((T - 38)/2)), with Ea = 60 kJ/mol, so the rate roughly doubles for every 10 C (Q10 about 2).
  • Acidity: pH = 3.8 + 2.3 exp(-A / 1.6), where A is the accumulated population-time.
  • Baking: heat conduction in a sphere, rho c_app dT/dt = (1/r^2) d/dr (k r^2 dT/dr), surface heat transfer q = h (T_oven - T_surface) with h = 12 W/m2K convection + radiation (+ condensing steam at the start). The apparent heat capacity c_app = 2800 J/kgK plus a latent-heat bump near 100 C for evaporating water.
  • Browning: first-order Maillard / caramelisation with an Arrhenius rate in the crust temperature (only once the crust is above 105 C).

Honest simplifications

  • The loaf is a sphere of the same volume. Real loaves are flatter, so a real core heats a little faster.
  • The thermal conductivity (1.5 W/mK) is an effective value that folds in vapour transport inside the crumb; it was calibrated so that a 1.2 litre loaf reaches 96 C in the centre after about 36 minutes at 220 C, in line with typical recipes. It is not a measured material constant.
  • One lumped yeast population, one growth rate. Real starters have several yeast species, bacteria and a lag phase; flour, hydration and salt shift all of the rates. The calibration (a 20 % starter doubles the dough in about 5 h at 24 C) is typical, not universal.
  • Oven spring is an empirical multiplier (more gas expansion with more remaining gas potential, less when over-proofed); crust formation and cracking are not simulated.
  • The poke-test messages are rules of thumb tied to the volume ratio.

Things to try

  • Compare 18 C, 24 C and 30 C kitchens on the first graph: the cold dough needs more than twice as long.
  • Bake at 250 C and at 170 C: watch the crust-versus-core gap in the second graph and the browning percentage.
  • Over-proof the dough past 3 hours beyond ready and see how the oven spring disappears.
  • Switch the steam off and compare the crust.
Loading model...
Loading Blender model...
Dough volume against proofing time for 18, 24 and 30 C kitchens (white: your setting)
Baking: core, crust and oven temperature
Temperature profile from the centre to the crust
Made with 🟠 Blender · Three.js