Presets
Playback
Apparatus
Model checks
The science
What is modelled
Hot water carries soluble compounds out of the leaf. The fast pool (aroma, sweetness, colour) comes out in the first minute or two; the slow pool (tannins, catechins, caffeine, the bitter part) keeps coming out as you wait and much faster when the water is hotter. The pot cools while it brews. Good tea stops when the fast pool is nearly done and the slow one has barely started.
Equations
- Extraction in each pool
dCi/dt = ki(T)(1 − Ci), soCi = 1 − e−ki tat constant temperature. - Arrhenius rate
ki(T) = ki,95 exp[−(Ea,i/R)(1/T − 1/T95)]with R = 8.314 J/mol/K. - Pouring
T0 = (mwcwTkettle + mpcpTpot)/(mwcw + mpcp); coolingT(t) = Troom + (T0 − Troom) e−t/τ, τ = 40 min with the lid and 18 min without. - Strength
TDS = 100 mleaf(afCf + asCs)/mwater; score100 exp[−½((ΔA/0.20)² + (ΔB/0.13)² + (ΔS/0.075)²)].
Checks run in the page
- Constant-temperature extraction against 1 - exp(-k t).
- Cooling pot: exponential-step solver against RK4.
- Pouring energy balance and the Arrhenius ratio against its closed form.
- Cup energy balance and bounds of both pools on a grid of teas, temperatures and times.
Honest simplifications
Two lumped pools and one rate per pool; real tea has hundreds of compounds and leaf size, stirring and water chemistry matter too. All rate constants, activation energies, soluble fractions and targets are illustrative model values that behave like a typical pot of tea, not measurements. Milk lowers perceived bitterness by an assumed 35 % at 40 mL and does not change extraction.
What to try
- Press Stewed for ten minutes: the bitter pool overshoots its target while the aroma pool is long finished.
- Press Cool kettle, short steep to see low temperature slow the bitter pool far more than the aroma pool.
- Press Sencha at 80 degrees: a green tea has a lower temperature optimum than the black teas.