Volcano Lava Kick Car - 2D map

Top-down map with tyre-force vectors, slip-angle lines, friction circle, flight profile and heat rings - same physics module as the 3D lab.

Switch to 3D

Presets

Playback

Vehicle and ground

Keys: W/S gas and brake, A/D steer, Space handbrake, R restart, C next camera. Touch: on-screen pad.

Experiments

The autopilot takes the wheel; any key hands control back.

Map

Scroll to zoom. C toggles camera follow.

Layers

Model checks

The science

Bicycle model with a friction circle

The truck is a planar rigid body with a front and a rear axle (the "bicycle model"). In the body frame the equations of motion are m(u̇ − v r) = ΣFx, m(v̇ + u r) = ΣFy and Iz ṙ = a Fyf − b Fyr, integrated with a semi-implicit Euler step at 240 Hz. The lateral force of an axle follows the slip angle α = atan(vlat/vlon) − δ through Fy = −Fymax tanh(Cα N α / Fymax) with Fymax = √((μN)2 − Fx2): the longitudinal and lateral tyre forces together can never exceed the friction circle μN, so braking or accelerating in a corner takes grip away. Axle loads include load transfer, Nf,r = m(g b,a ∓ ax h)/L.

Engine, drag and top speed

Drive force is P/v (constant power) capped by the traction limit μNrear; resistance is ½ρ Cd A v2 + Crr m g. Top speed is the root of that balance, which the page solves independently and draws as the dashed line in the speed graph. The handbrake locks the rear wheels so the friction force opposes the patch velocity vector (a drift).

Kicking a rock: impulse and restitution

A prop is a disc; the truck is an oriented box. At contact the normal impulse is j = (1+e) vrel / (1/M + 1/m + (r×n)2/Iz), which conserves linear momentum and gives the separation speed e vrel. For a central head-on hit the rock leaves at (1+e) M u/(M+m). Rocks (80 kg, e = 0.25), crates (25 kg, e = 0.1) and lava boulders (900 kg, e = 0.3) then slide against ground friction μg = 0.7.

Ramps and flight

A kicker ramp of height H and length L is a wedge; on it gravity pulls horizontally with g s/(1+s2) (s = H/L), so the lip speed is ulip2 = u02 − 2gH/(1+s2). After the lip the truck is ballistic: t = (vz + √(vz2 + 2gH))/g with vz = s ulip. Landing load is estimated as 1 + vz2/(2 · 0.25 m · g) (the suspension stroke absorbs the impact).

Radiant heat from the lava

A vent of radius R and crust temperature Tc radiates q = εσ(Tc4 − Tamb4); the truck, at distance d, receives the fraction F = R2/(R2 + d2) (the view factor of a small surface facing the disc: an upper bound). The hot components obey C dT/dt = α q F A − (h0 + h1 v) As (T − Tamb), and engine power fades linearly between 100 and 160 °C.

Honest simplifications: the dynamics are planar plus a vertical state (no suspension travel, wheel hop or rollover); the ground is flat except for the wedge ramps; tyres use a one-parameter saturation curve, not a measured Pacejka fit; props are discs without rotation inertia; the heat model lumps the hot parts into one thermal mass (40 kJ/K is a game-scale value) and ignores shadowing; vent temperatures and the 5 kW/m2 ring are illustrative. Landing load and heat values are indicative, not engineering data. Inanimate objects only.

What to try
  • Turn on Slip-angle lines: blue is where the front wheels point, green is where the axle actually moves; the angle between them is the slip angle that creates the cornering force.
  • Watch the friction circle graph while braking into a corner: the dots run to the dashed circle and the lateral force collapses.
  • Press Ramp jump run and compare the yellow simulated flight with the dashed ballistic parabola in the profile box.
  • The three dashed heat rings show where the radiant flux is 1, 5 and 10 kW/m2.
Friction circle: axle forces (kN)
Slip angles and yaw rate
Body temperature, radiant flux and power
Made with 🟠 Blender