Fieldnotes / Fluid systems
Open the 2D laboratory ↗
Interactive apparatus / 04. Hydraulic energy

Inside the hydraulic ram

Inspect the waste valve, delivery check, pressure chamber and flow paths. Select a component or use the camera presets to explore the machine.

MODEL SEED · 593817
03 / Inspectable assemblyPreparing scene
ORBIT · SELECT · EXPLODEWater source → drive pipe → ram valve → air vessel → lifted outlet

Pressure and delivery pulse

Same scientific engine as the 2D laboratory

Valve pressure transient

First 8 round trips · m water column

Delivery flow over one cycle

Air-chamber-smoothed discharge · L/s

Operating conditions

Scenario controls are URL-synchronised with the 2D counterpart.

Live model
2.5 m
m
16.0 m
m
8.0 m
m
50 mm
mm
55 ms
ms
7.0 L
L
1.15 Hz
Hz
0%
Separate components
The science / equations and assumptions

The ram pump converts the momentum of a moving water column into a short pressure rise when the waste valve closes. A delivery check valve opens only when the transient pressure exceeds the delivery head. The air vessel stores and releases a small volume, reducing flow pulsation.

v = √(2gHₛ / [1 + fᴅL/D + K])   ·   Δp = ρaΔv
ΔH = Δp/(ρg)   ·   tᶜʳⁱᵗ = 2L/a
Qₒᵤₜ = η₀(Hₛ/Hᴅ)Qᵢₙ   ·   P = ρgHQ

Reduced-order teaching model: fixed Darcy friction factor 0.025, minor-loss coefficient 2, wave speed 900 m/s, 0.5 m check-valve allowance and nominal efficiency 55%. Air-chamber ripple damping is illustrative. This is not a CFD solver or pump-sizing tool; do not use it for construction or safety decisions.

Values are illustrative. The independent numerical check compares the pressure and head forms of the Joukowsky relation and verifies the hydraulic power balance.

Made with 🤖 ChatGPT · Three.js