Spring-Mass Force Lab (2D)

Drag the cart, then watch forces, energy and resonance. Same physics as the 3D lab.

Switch to 3D

Presets

Playback

System

Surface

Driver

Start and speed

Layers

Model check

The science

What is modelled

A cart of mass m slides on a rail and is held by an ideal (massless, linear) spring. The motion is one-dimensional along the rail. You can add viscous damping (air or oil), sliding Coulomb friction, tilt the rail, and push the cart with a sinusoidal driving force. Every number on screen is computed from the equation of motion below, not drawn by hand.

Equations

  • Equation of motion: m x'' = -k x - c v - m g sin(a) - mu m g cos(a) sgn(v) + F0 cos(2 pi f t), with x = 0 where the spring has its natural length.
  • Natural frequency f0 = (1/2pi) sqrt(k/m), damping ratio zeta = c / (2 sqrt(k m)): under 1 the cart rings, over 1 it creeps back without overshoot, and at exactly 1 it returns fastest without overshoot.
  • Steady driven amplitude: A = F0 / sqrt((k - m w^2)^2 + (c w)^2), w = 2 pi f. Without damping it grows without bound at f = f0; with damping the peak is finite and sits slightly below f0.
  • Energy: E = m v^2/2 + k x^2/2 + m g sin(a) x. The balance E = E0 + W_driver - heat_damping - heat_friction is tracked step by step (the dashed green line in the energy graph).
  • Integration: velocity Verlet with a 2 ms step; static friction holds the cart when the net non-friction force is no larger than mu m g cos(a).

Checks run in this page

  • Period: a private undamped run must measure 2 pi sqrt(m/k) within 0.2 %.
  • Closed form: a damped free run is compared with x0 e^(-g t)(cos wd t + g/wd sin wd t) at 2.5 s.
  • Resonance: a driven run, after its transient, is compared with the amplitude formula above (within 1 %).
  • Energy ledger: a private run with friction, incline and a driver, and also the live page, must satisfy the work-energy balance.

Honest simplifications

  • Spring mass is ignored and the spring never saturates or buckles; rolling wheels are modelled only through the friction coefficient and the viscous term.
  • Real air drag is closer to v^2 than to v; linear damping is chosen because it has the exact closed forms used in the checks.
  • Coulomb friction uses one coefficient for static and sliding contact.
  • The coloured arrows are scaled for readability (0.012 m per newton, capped).
Position and velocity against time
Energy: kinetic, potential, heat, ledger
Resonance curve (steady amplitude against driver frequency)
Phase portrait (x against v)
Made with 🟠 Blender · Three.js