Presets
Playback
System
Surface
Driver
Start and speed
Camera
Layers
Quality
Model check
The science
What is modelled
A cart of mass m slides on a rail and is held by an ideal (massless, linear) spring. The motion is one-dimensional along the rail. You can add viscous damping (air or oil), sliding Coulomb friction, tilt the rail, and push the cart with a sinusoidal driving force. Every number on screen is computed from the equation of motion below, not drawn by hand.
Equations
- Equation of motion:
m x'' = -k x - c v - m g sin(a) - mu m g cos(a) sgn(v) + F0 cos(2 pi f t), withx = 0where the spring has its natural length. - Natural frequency
f0 = (1/2pi) sqrt(k/m), damping ratiozeta = c / (2 sqrt(k m)): under 1 the cart rings, over 1 it creeps back without overshoot, and at exactly 1 it returns fastest without overshoot. - Steady driven amplitude:
A = F0 / sqrt((k - m w^2)^2 + (c w)^2),w = 2 pi f. Without damping it grows without bound atf = f0; with damping the peak is finite and sits slightly belowf0. - Energy:
E = m v^2/2 + k x^2/2 + m g sin(a) x. The balanceE = E0 + W_driver - heat_damping - heat_frictionis tracked step by step (the dashed green line in the energy graph). - Integration: velocity Verlet with a 2 ms step; static friction holds the cart when the net non-friction force is no larger than
mu m g cos(a).
Checks run in this page
- Period: a private undamped run must measure
2 pi sqrt(m/k)within 0.2 %. - Closed form: a damped free run is compared with
x0 e^(-g t)(cos wd t + g/wd sin wd t)at 2.5 s. - Resonance: a driven run, after its transient, is compared with the amplitude formula above (within 1 %).
- Energy ledger: a private run with friction, incline and a driver, and also the live page, must satisfy the work-energy balance.
Honest simplifications
- Spring mass is ignored and the spring never saturates or buckles; rolling wheels are modelled only through the friction coefficient and the viscous term.
- Real air drag is closer to
v^2than tov; linear damping is chosen because it has the exact closed forms used in the checks. - Coulomb friction uses one coefficient for static and sliding contact.
- The coloured arrows are scaled for readability (0.012 m per newton, capped).
Loading model...
Loading Blender model...