Model (Obreimoff wedge test). A thin sheet (thickness t, width b) is lifted off a rigid block by a wedge of half-angle θ driven to depth s, so the mouth opens by h = 2 s tanθ. The sheet is a cantilever clamped at the crack tip, length a: P = 3EI h / a³, I = b t³/12, deflection w(ξ) = P ξ²(3a − ξ)/(6EI) with ξ measured from the tip.
Crack growth. Energy release rate G = 3 E t³ h² / (8 a&sup4;); the crack runs when G reaches the cleavage toughness Gc. With uniform Gc: a = (3 E t³ h² / 8Gc)1/4 (a grows like √h, stable). Along a flawed plane Gc(x) varies; the crack stalls at tough patches and jumps past them.
Wedge force and blows. Balancing the flank forces gives F = 2P tan(θ + atan μ). A blow of energy Eb delivers 0.3 Eb to the wedge, so it advances until ∫F ds equals that.
Minimum thickness. The root bending stress is 6Pa/(b t²); with the crack in equilibrium it equals √(6 E Gc / t) whatever the opening. Sheets thinner than 6 E Gc / σt² snap instead of peeling (graph 3).
Illustrative values. E = 60 GPa, Gc = 20 J/m², σt = 55 MPa, efficiency 0.3: round numbers for roofing slate, not a quarry's measurements; real toughness depends on direction and mica content.
Honest simplifications. Small-deflection beam theory without root rotation; rigid, held-down lower block; load applied at the mouth; flaws are a smooth random profile; the vertical scale is exaggerated (label in the picture shows the factor); mallet and backdrop are Blender renders without data. Educational physics, not quarrying advice.
Independent checks (run on load; the same core drives the 3D page):
| running… |