Presets
Playback
Wind sea (spectrum)
Wind speed, fetch and how narrowly the waves follow the wind. Moving these switches to the spectrum mode.
Water depth
Changes the dispersion relation: shallow water slows long waves.
Mode
Spectrum or one regular wave.
Regular wave
One wave of chosen period and height; look side-on at the buoy orbit.
Camera
Quality
Layers
Model checks
The science
Dispersion: why long waves outrun short ones
For small-amplitude waves on water of depth h the angular frequency and wave-number are tied by ω² = g k tanh(k h). In deep water (kh > π) the tanh is 1, so the phase speed is c = ω/k = g/ω = gT/2π: a 12 s swell runs at 18.7 m/s, a 4 s ripple train at 6.2 m/s, and a storm sorts itself into long, fast swell that reaches a coast first. In shallow water (kh < π/10) c → √(gh) whatever the wavelength. The energy travels at the group speed cg = ½ c [1 + 2kh / sinh 2kh], half the phase speed in deep water and equal to it in shallow water. The page solves the relation for k(ω, h) by Newton iteration; check 3 compares it with both limits.
A sea state is a spectrum
Wind-driven waves are well described as the sum of many independent sinusoids. The Pierson-Moskowitz spectrum for a fully developed sea is S(ω) = α g² ω-5 exp[-β (g/Uω)4] with α = 8.1×10-3, β = 0.74 and U the wind speed at 19.5 m. Its area is m0 = αU4/(4βg²), so the significant wave height Hs = 4√m0 ≈ 0.209 U²/g (check 1 integrates it numerically). For a limited fetch F the page uses JONSWAP: the same shape with the Hasselmann fits for α and the peak frequency and a peak-enhancement factor γ = 3.3. The sea is then built from 48 waves of random phase and direction (cos2s spread), each carrying the energy a²/2 = S(ω)Δω.
Gerstner (trochoidal) waves and the buoy
Every water surface point is labelled by its rest position x0 and moves on an orbit: x = x0 − a coth(kh) sin(k·x0 − ωt) along the wave direction and y = a cos(k·x0 − ωt). This is the linear orbit of a particle (circle in deep water, flat ellipse in shallow water) and it gives sharp crests and wide troughs. The buoy is simply the surface point at the origin: it heaves with the elevation and tilts to the local surface normal, which is computed from the Jacobian of the same map. The spectrum in the lower graph is a periodogram of the buoy's own heave record, the same way a real wave-rider buoy is analysed. Foam appears where the Jacobian of the horizontal map drops towards zero, i.e. where the Gerstner crests would overturn.
Honest simplifications: linear (Airy) waves with no wave-wave interaction, wave breaking, wind forcing or currents; the spectrum is not re-evaluated in shallow water (so shoaling and depth-limited breaking are shown in the 2D companion, not here); only 48 components, so the sea repeats on long time scales; the buoy is a perfect surface follower (valid when it is small compared with the wavelength and its natural period is short); the grid is 420 m wide, so waves longer than about 250 m (winds above ~20 m/s) are cropped. Quantities are SI. The 3D model of the buoy and island is drawn for clarity, not copied from a specific real station.
What to try
- Press Storm (Bft 10) and then Calm: Hs and the peak period fall together, the peak wavelength changes by a factor of about ten, and the orange spectrum shifts to higher frequency.
- Set Short fetch (50 km): the sea is lower and shorter than the fully developed sea at the same wind, and the spectrum is sharper (JONSWAP peak).
- Choose Orbits: regular swell, look from Side-on and watch the yellow trail: the buoy runs on a circle. Then take Orbits: shallow swell (8 m deep): the circle flattens into a long horizontal ellipse.
- Drag the depth slider down to 5 m and watch the third graph: the group speed catches up with the phase speed and both approach the dashed shallow-water limit.
- Open Lighthouse to see the Blender island and lantern over the swell.