Ocean Wave Flume (3D)

A Blender wave flume with a paddle and a sloping beach: dispersion, shoaling, breaking and the orbits of water particles.

Switch to 2D

Presets

Playback

Wave

Height and period set by the wave paddle.

Flume

Still-water depth, beach slope and the position of the probe.

Time

Slow motion makes the orbits easier to follow.

Camera

Layers

Quality

Model checks

The science

Waves in a flume

A paddle at the left end of a 12 m flume makes regular waves of height H and period T. The water is h deep over a flat section and then rises along a beach of slope 1:n. The page uses linear (Airy) wave theory with a slowly varying depth.

Dispersion relation

The angular frequency w = 2 pi / T and the wavenumber k = 2 pi / L are linked by w^2 = g k tanh(k h). In deep water (h > L/2) this gives w^2 = g k and the phase speed c = g T / (2 pi): long waves outrun short ones. In shallow water (h < L/20) it gives c = sqrt(g h), independent of the period. The energy travels at the group speed c_g = 1/2 (1 + 2 k h / sinh 2 k h) c.

Energy, shoaling and breaking

The wave energy density is E = 1/8 rho g H^2 and the power per metre of crest is P = E c_g. Without losses P is constant, so as the water shallows and c_g falls the height rises: H ~ h^(-1/4) in shallow water (Green's law). When H reaches about 0.78 h the wave breaks; the page caps the height at that value and marks the breaking point.

Particle motion

The water particles move in closed orbits with velocities u = a w cosh(k(z+h))/sinh(kh) cos(theta) and w = a w sinh(k(z+h))/sinh(kh) sin(theta), where a = H/2: circles in deep water, flatter ellipses in shallow water, and back-and-forth sliding at the bed. Following a particle through the wave field gives a small net drift, the Stokes drift a^2 w k exp(2 k z) in deep water.

Numerical checks on this page

(1) The phase speed measured by following a crest in the simulated surface equals w/k from the dispersion relation. (2) For a long wave on the beach the computed height growth equals Green's law. (3) A marker followed for 10 periods drifts at the Stokes drift speed.

Honest simplifications

The model is linear theory with a WKB (slowly varying depth) amplitude, so there is no reflection from the beach, no bottom friction and no real breaking physics (only a height cap); crests are sinusoidal rather than peaked, and the flume is two-dimensional. The vertical scale is exaggerated in the 2D view so that centimetre waves can be seen.

What to try

  • Deep-water swell and Short ripples: compare the speeds in graph 3; the shorter wave is slower.
  • Shallow-water waves: the phase and group speeds both approach sqrt(g h).
  • Shoaling on a gentle beach: move the probe towards the shore and watch the height grow in graph 2.
  • Steep waves break: the height is capped at 0.78 of the depth and a red line marks the breaking point (foam in 3D).
  • Follow a yellow marker: it moves in an orbit that shrinks with depth (graph 4).
Loading model...
Loading Blender model...
Dispersion relation w(k)
Wave height along the flume
Phase and group speed versus depth
Orbital velocity versus depth
Made with 🟠 Blender · Three.js