Garden Eels in a Current: Drag, Bending and Sway

A colony of garden eels leans and sways in a boundary-layer current: a flexible-body drag model, log-law flow and swell, on a Blender-built seabed.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A garden eel stands in its burrow with the front part of its body in the open water, facing the current. The page treats the emerged body as a flexible cantilever: ten rigid links with joint springs that represent the bending stiffness of the muscle (EI), clamped at the burrow mouth. Water pushes on every link with a quadratic drag law, the current grows with height above the sand following the turbulent boundary-layer log law, and a swell adds an oscillating surge. The Lagrange equations of the chain are solved exactly (full mass matrix, Coriolis terms) with 5000 steps per second.

Equations

  • Current: u(z) = (u*/κ) ln(z/z0), κ = 0.41, z0 = 0.01 cm, scaled so that u(1 m) is the slider value; plus uw sin(2πt/Tw - phase) for the swell.
  • Drag by the cross-flow (independence) principle: on each link the relative flow is split into components normal and tangential to the body; Fn = ½ ρ Cd D l |wn| wn and a small skin-friction force along the body (Cf = 0.01).
  • Body: bending stiffness k = EI / l per joint (twice at the clamp, which spans half a link), Kelvin-Voigt damping, weight minus buoyancy, and the mass of the water the body drags along (added mass, Ca = 1, applied in all directions).
  • Beam theory for comparison: f1 = (1.87512/2π) √(EI / μ L4) and, for a uniform sideways load q, a tip offset q L4 / 8EI.

Simplifications

The eel is a passive, planar bending beam: real garden eels also control their muscle tone, bend in three dimensions, change body diameter along the length, retreat into the burrow in strong flow and are knocked by turbulent eddies, none of which is modelled here. The stiffness values are illustrative (a relaxed to a strongly contracted body), not measurements of any species. Cd is taken as constant; vortex shedding behind the body is only reported (Strouhal number 0.2), not simulated. The colony members differ only in length and in the phase of the swell, and they do not interact. Added mass is applied equally along and across the body, which slightly overstates the inertia for motion along the body.

Loading model...
Loading Blender model...
Current profile and eel shape
Head position over time
Steady lean against current speed
Made with 🟠 Blender · Three.js