Conveyor Transfer Dust: Hood, Extraction Fan and Mist at an Ore Transfer Point

A Blender-built ore transfer station: the falling stream drags air in, a hood and fan pull dust out, mist knocks it down, and the rest leaks to the walkway. Real settling, induced-air and mass-balance equations.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

Where one belt drops ore onto another, the falling stream drags air along and fine dust is released. A hood (enclosure) over the landing zone, an extraction fan and a water-mist spray try to stop that dust reaching the walkway. The page treats the hood as one well-mixed box and follows the dust of every size class through four possible fates: pulled out by the fan, leaked out of the enclosure into the walkway, settled onto the belt, or knocked down by mist. The numbers on screen come from the equations below; the dots are tracer particles that take the route and the residence time that the model assigns to their size.

Equations

  • Settling speed of a particle of diameter d: v = (ρp − ρa) g d² C(d) / (18 μ f(Re)), with the Cunningham slip factor C = 1 + Kn (1.257 + 0.4 e−1.1/Kn), Kn = 2λ/d, mean free path λ = 0.0665 µm, and the Schiller-Naumann drag factor f = 1 + 0.15 Re0.687, Re = ρa v d / μ (solved by fixed-point iteration). A 10 µm unit-density sphere falls at about 3 mm/s; a 100 µm ore grain at about half a metre per second.
  • Dust size: a lognormal mass distribution with median d50 and geometric standard deviation 2.2, cut into 16 logarithmic bins from 1 to 200 µm.
  • Emission: S = M e (feed rate times an emission factor in g per tonne), split over the bins by mass share.
  • Induced air: Qind = ER · qore · √(H / 1 m), with bulk ore volume flow qore = M/ρbulk (ρbulk = 1600 kg/m³), drop height H = 2.3 m and an entrainment ratio ER = 4 (see the simplifications).
  • Air balance of the enclosure: the air that cannot leave through the fan leaves through the gaps, Qleak = max(0, Qind − Qex) + Qgap; if the fan removes more than the stream brings in, make-up air is drawn in through the openings.
  • Mass balance per size bin (volume V = L W Hh, floor area A = L W): V dC/dt = S − (Qex + Qleak) C − v A C − kmist V C. The page advances it with the exact exponential solution, so the steady state is C = S / (V K) with K = (Qex + Qleak)/V + vA/V + kmist, and every route takes the share kroute/K of the dust of that size.
  • Mist: droplets of about 100 µm collect dust by impaction with efficiency E = (St/(St + 0.25))², St = ρp d² C u / (9 μ Ddrop), relative speed u = 3 m/s, and kmist = (mist) · 2 s−1 · E. Coarse dust is knocked down well, the finest dust hardly at all.
  • Capture velocity of a plain hood opening (ACGIH form): v = Q / (10 x² + A) at distance x = 0.5 m from a 0.5 m² face; guidance for dust released at low speed is commonly quoted as 0.5 to 1 m/s.
  • Walkway exposure: leaked dust diluted into 3 m³/s of general ventilation; the respirable share uses a 4 µm, geometric-standard-deviation-1.5 collection curve. A value of 3 mg/m³ is shown only as an illustrative guide, not as a legal limit.

Checks run in the page

  • The closed-form settling speed against an RK4 integration of the particle equation of motion (20, 60 and 150 µm).
  • Mass balance: emitted = extracted + leaked + settled + scavenged + still airborne, to rounding error.
  • The time-marched concentration against the closed-form steady state in every bin.
  • 60 000 sampled tracer particles reproduce the model's route fractions within statistical error.
  • The binned lognormal has the requested median and unit mass; Cunningham factor limits.

Honest simplifications

  • The enclosure is a single well-mixed box: no airflow field, no plume, no re-suspension of dust from the belt. Real hoods have strong concentration gradients; this is a first, design-level estimate.
  • The induced-air formula is an illustrative scaling, not a measured correlation; the entrainment ratio ER = 4, the gap leak and the mist constants (2 s−1, 100 µm droplets) are assumptions chosen to give plausible magnitudes. Real systems must be measured on site.
  • Brownian diffusion and electrostatic effects are left out, so mist efficiency for the finest dust is underestimated.
  • Settled and scavenged dust is counted as removed with the ore. Emission factors of 5 to 200 g per tonne are plausible orders of magnitude, not data for a specific ore.
  • The tracer dots are drawn for illustration: they follow the model's fractions and residence times but are not a flow simulation, and their speed is not to scale.
  • This is not an occupational-hygiene calculator and no part of it should be used to assess a real workplace.

What to try

  • Pull the extraction flow down through the induced air (the yellow line in the last graph) and watch the leak jump.
  • Lengthen the enclosure with the fan off: settling alone removes coarse dust but hardly touches the fine dust.
  • Switch on mist with no fan: it removes coarse and medium dust, but the fine tail passes.
  • Move the median size to 8 µm and see how much harder fine dust is to stop.
Loading model...
Loading Blender model...
Dust in the air and leaked to the walkway over time
Where dust of each size ends up
Settling speed against particle size
Leak against extraction flow
Made with 🟠 Blender · Three.js