Wave energy converter: heaving buoy, wave power and the capture-width limit

Blender-built buoy on an animated sea: heave, wave force, PTO power, resonance and the lambda/2pi limit from the linear model of the 2D page.

Switch to 2D

Presets

Playback

Waves, buoy and PTO

Camera

Layers

Quality

Model check

The science

What you are looking at

A Blender-built point-absorber buoy rides on regular deep-water waves. Its heave is the steady solution of the 2D page's equation of motion, its hull sinks and rises through the animated sea surface, and the beacon on the mast brightens with the instantaneous power drawn by the power take-off (PTO). The yellow dots are water particles: they move on circles whose radius shrinks like A ekz with depth, which is why the wave force on the buoy contains the factor e−kD. The blue and red arrows show the wave force and the PTO damping force. The camera Underwater shows the seabed reaction column that the PTO works against.

Model

Heave of a vertical cylinder (radius R, draft D) in waves of amplitude A = H/2: (m + ma) &xdot; + (Br + BPTO) ẋ + K x = Fe cos ωt, with m = ρπR²D, K = ρ g πR², Froude–Krylov force Fe = ρ g A πR² e−kD, radiation damping from the Haskind relation Br = ω³Fe²/(2ρ g³A²) and ω² = g k. Absorbed power is ½ BPTO ω²X²; at resonance with a matched damper it reaches Fe²/(8Br) = Jλ/(2π), where J = ρ g²H²T/(32π) is the wave power per metre of crest: a small buoy can collect the power of a crest λ/2π wide.

Honest simplifications

Linear small-amplitude theory in deep water, regular waves, heave only, constant added-mass coefficient, lossless damper, PTO reacting against a fixed seabed frame (idealised). The model flags when the heave amplitude exceeds the draft. Seabed depth, the reaction column and the anchor are not to scale; the real device would be limited by mooring, stroke and survival loads.

Checks run in the page

  • The five checks of the 2D page: dispersion and wave power, Haskind limit, resonance bound, RK4 time domain against the frequency domain, energy balance.
  • The rendered water mesh is read back: wave amplitude, mean crest spacing (against λ) and the hull submergence taken from the scene graph at five times against D + η − heave.
  • The particle columns are sampled over one wave period at four depths: orbits must be circular with radius A ekz, and e−kD must equal Fe/(ρ g A πR²).

Credits

Blender 5.2 buoy hull, deck equipment and seabed column with Cycles-baked paint and metal textures (Draco GLB); Three.js r160.

Loading model...
Loading Blender model...
Absorbed power vs wave period
Wave elevation and buoy heave (last three periods)
Instantaneous PTO power
Capture width vs wave period
Made with 🟠 Blender · Three.js