Vortex Street Flume (3D)

A Blender-built water flume: dye needles, vortex columns, Bernoulli water dimples and a spring-mounted cylinder.

Presets

Playback

Fluid and flow

Elastic mount (vortex-induced vibration)

View

Camera

Layers

Quality

Model check

The science

Reynolds number and the onset of shedding

A cylinder of diameter D in a stream U of a fluid with kinematic viscosity nu is governed by Re = U D / nu. For Re < 47 the wake is a steady pair of attached eddies. At the critical value Rec ≈ 47 the wake becomes unstable (a Hopf bifurcation) and sheds vortices alternately from the two sides: the Karman vortex street. Between about 47 and 190 the street is laminar and two-dimensional; above that three-dimensional instabilities appear, and for Re > 300 the wake is turbulent although the shedding stays visible as a coherent peak.

Strouhal number

The shedding frequency is fs = St U / D. We use Roshko's correlation St = 0.212 (1 - 21.2 / Re) for 47 < Re < 300 and St ≈ 0.21 above. Water at 1 cm/s past a 10 mm rod gives Re = 100, St = 0.167 and fs = 0.17 Hz; a 3 mm wire in a 5 m/s wind sings at about 350 Hz (the Aeolian tone).

The street as point vortices

Each shed vortex is a Lamb-Oseen vortex of circulation G: velocity utheta = G / (2 pi r) (1 - exp(-r2/s2)) and vorticity w = G / (pi s2) exp(-r2/s2), with a core s that grows slowly. The cylinder is the potential-flow doublet u = U(1 - R2(x2-y2)/r4), v = -2 U R2 x y / r4. Every vortex is advected by that flow plus the Biot-Savart velocity of all others (midpoint Runge-Kutta). The dye particles use the same velocity field.

For an infinite staggered street with spacing a between same-sign vortices and row separation h, Karman showed the street moves relative to the fluid with u = G / (2a) tanh(pi h / a) and is stable only for h / a = 0.281. We choose the circulation so that the vortices drift at 0.86 U (as measured behind real cylinders) and shed them at spacing a = 0.86 U / fs.

Forces and the elastic mount

Each shed vortex flips the sign of the side force: CL(t) = CL0 sin(2 pi fs t) with the empirical amplitude CL0 ≈ 0.9 sqrt(1 - 47/Re); the drag fluctuates at 2 fs around CD ≈ 1 + 4/sqrt(Re). Force per unit length is F = ½ rho U2 D C. A cylinder on springs obeys m y'' + c y' + k y = FL(t); at resonance, fs = fn, the steady amplitude is F0 / (m sqrt((wn2 - w2)2 + (2 zeta wn w)2)). This is what shakes chimneys, risers, power lines and periscopes.

Independent checks run in the page

1) A hidden 300-time-unit run records a probe velocity downstream; its Hann-windowed spectrum must peak at the Roshko St (within 3.5 %). The frequency comes from vortices passing the probe, not from the shedding clock. 2) The measured drift speed of mid-street vortices must match Karman's formula evaluated with the street's measured a, h and G (within 8 %; the real street is finite). 3) The mount oscillator is integrated for 120 periods and compared with the closed-form resonance amplitude (within 3 %).

Honest simplifications

The model is two-dimensional and inviscid except for core growth; vortices are inserted at the rate and strength the physics demands rather than being born in a boundary layer, there is no feedback of the cylinder motion on the wake (so no true lock-in frequency capture), and the wake broadening toward h = 0.281 a is an empirical relaxation. Above Re 190 real wakes are three-dimensional. Lift/drag amplitudes are empirical fits, not computed from the flow. Playback is slowed enormously for fast flows; the readouts are in real units.

Things to try

  • Drag the flow speed across Re = 47 and watch the steady wake switch to a street.
  • Use the lock-in preset, then change U slightly: the oscillator response collapses away from resonance.
  • Click anywhere to place the probe; compare its local vorticity with the colours.

Educational model of an idealised laboratory flow.

Loading model...
Loading Blender model...
Lift and drag coefficients over time
Strouhal number vs Reynolds number
Probe velocity spectrum (hidden run)
Shedding frequency vs flow speed and mount resonance
Made with 🟠 Blender · Three.js