3D Droplet Splash: Crown, Crater and Jet

A drop hits a liquid film: Weber and Ohnesorge numbers, Cossali splash threshold, crater energy budget, Rayleigh-Plateau crown breakup and a Worthington jet.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A liquid drop leaves a dropper, falls through air and hits a shallow layer of the same liquid. Depending on speed, size, surface tension and viscosity it either sinks in, throws up a Worthington jet, or builds a thin crown whose rim breaks into a ring of tiny droplets. The page computes the governing dimensionless numbers, decides which regime applies, and animates the stages with scaling laws taken from the fluid-mechanics literature.

Equations

  • Fall with quadratic drag: vt = sqrt(4 ρ g D / (3 Cd ρa)) and v(H) = vt sqrt(1 − exp(−2 g H / vt²)), with Cd = 0.47.
  • Weber We = ρ v² D / σ, Reynolds Re = ρ v D / μ, Ohnesorge Oh = μ / sqrt(ρ σ D).
  • Splash threshold on a thin film (Cossali, Coghe and Marengo): K = We Oh−0.4 > Kc = 2100 + 5880 δ1.44, with film depth δ in drop diameters.
  • Crater size from an energy budget (Engel): α · ½ m v² = 2 π σ R² + ρ g π R4 / 4, a hemisphere of radius R with α about 0.2. The crater then oscillates as a capillary-gravity wave: ω² = g k + σ k³ / ρ with k = 2.405 / R, so it closes after Tc = π / ω.
  • Crown base radius grows like a square root of time, Rc = C sqrt(v D t) with C about 1.1; the rim is a cylinder of diameter 0.12 D that decelerates under gravity and surface tension.
  • Rayleigh-Plateau breakup of the rim: the fastest growing wavelength follows from ω² ∝ x I1(x)/I0(x) (1 − x²), maximised at x = 0.697, giving a wavelength of 4.51 rim diameters. Volume conservation of one wavelength gives drops of diameter ds = (1.5 λ d²)1/3 = 1.89 d.
  • Jet: after the crater closes, a column rises at vj = 6 sqrt(σ / (ρ R)), an illustrative capillary scaling, and its tip pinches off as one droplet.

Checks run in the page

  • The fall with air drag is integrated step by step and compared with the closed-form speed and distance.
  • The Rayleigh-Plateau maximum is found numerically from Bessel-function series and compared with the classic 0.697 and 4.51.
  • The crater radius from the closed-form root is verified by bisection, and the volume of all secondary droplets is shown to equal the volume of the crown rim.

Honest simplifications

Real splashes are three-dimensional, turbulent free-surface flows; here the crater, crown and jet are axisymmetric shapes driven by the scaling laws above, so their exact heights are illustrative and not a flow solution. The pre-impact motion shows only the last 4.6 cm of the fall, drawn at the true impact speed. The energy fraction alpha, the crown constant C, the rim diameter and the jet constant are fitted values from the literature, and the Cossali threshold was measured for water-like liquids on films thinner than about one drop diameter (deeper films are treated as one diameter). Viscous damping of the crater is not modelled, drops are assumed spherical in flight, and the air is still.

What to try

  • Raise the fall height and watch K cross the threshold line in the regime graph, at which point a crown appears.
  • Choose the viscous glycerol mix: Oh rises, K falls below K_c and the crown disappears.
  • Choose soapy water or ethanol: lower surface tension raises We and gives more, smaller droplets.
  • Make the film shallower (towards 0.1 D) to lower the threshold.
  • Use slow motion 0.002 to step through the 4 ms crown stage.
Loading model...
Loading Blender model...
Crater depth, crown rim and jet height vs time
Regime map: splash threshold in We and Oh
Impact speed vs fall height
Made with 🟠 Blender · Three.js