3D Dandelion Seeds

When does the wind pull seeds off a dandelion clock? Gusts, humidity, attachment strength and the flight that follows.

Switch to 2D

Presets

Playback

Parameters

Camera

Layers

Quality

Model check

The science

What is modelled

A dandelion head holds dozens of seeds, each fixed by a tiny stalk. A seed lets go when the drag of the wind on its open parachute exceeds the force that holds it. This page models that threshold with gusty wind and damp air, then lets the released seeds fly.

Equations

  • Drag on an attached seed: F = ½ ρ Cd Aopen u(t)², with Cd = 1.2, A the effective disc area of diameter d, and an opening factor open(RH): 1 up to 60 % humidity, falling linearly to 0.2 at 100 % (the pappus closes in damp air; the law is illustrative).
  • Attachment strengths vary from seed to seed: Fc = F0 exp(0.35 z), z a standard normal number. In a steady wind the released fraction is P(U) = Φ( ln(F(U)/F0) / 0.35 ); the wind that frees the median seed is Uc = sqrt(2 F0 / (ρ Cd A)).
  • Gusts: u(t) = U(h) [1 + I g(t)] with g an Ornstein-Uhlenbeck process of unit variance and correlation time τg; U(h) is the log-law wind U10 ln(h/z0) / ln(10/z0), z0 = 0.03 m. A seed is released after the drag has exceeded its strength for 0.15 s (a leaky timer, so a very short spike does nothing).
  • Flight after release: m dv/dt = m g + ½ ρ Cd Aopen |u − v| (u − v) in the same turbulent log-law wind; terminal speed vt = sqrt(2 m g / (ρ Cd Aopen)).

Checks run in the page

  • Terminal speed from time stepping against the closed form, within 1 %.
  • Monte Carlo of 200,000 seeds at the wind that frees the +0.5 sigma seed gives a released fraction equal to the normal CDF Phi(0.5), within 0.005.
  • At the median release wind the drag equals the median attachment force and the released fraction is 0.5.

Honest simplifications

The attachment force (0.1 to 1.5 mN here), its spread, the dwell time and the humidity law are round illustrative numbers chosen to give plausible behaviour; I did not fit them to a measured dataset, so treat the absolute wind speeds as indicative only. Drag on the attached seed is quasi-static and ignores the shelter of neighbouring seeds, and gusts are shared by all seeds on the head. Seeds are drawn magnified (default 10 times real size). After release, seeds are point masses with a constant drag coefficient and independent turbulence.

What to try

  • At the default preset, watch graph 1: seeds leave in bursts exactly when a gust crosses a threshold line.
  • Drop the wind to 2.5 m/s: almost nothing releases, although gusts occasionally free the weakest seeds.
  • Raise humidity to 95 %: the pappus closes, the drag falls and the same wind frees far fewer seeds (graph 3, blue curve).
  • Set gust intensity to 0: release becomes sharp at the threshold wind of graph 3; with strong gusts it spreads out.
  • Use the Dandelion clock camera to see the seeds lean before they let go.
Loading model...
Loading Blender model...
Wind at the head vs seed strength (dots: releases)
Fraction of seeds released vs time
Released fraction vs steady wind speed
Made with 🟠 Blender · Three.js