Salt Cavern Leaching - Direct vs Reverse (2D)

Two caverns, same water, opposite directions: see how the point of water injection decides where the salt wall is eaten away.

Switch to 3D

Presets

Playback

Circulation

Same flow, temperature and blanket for both caverns.

Rock and water

Mass transfer coefficient and blanket.

Layers

Model checks

The science

Two ways of pumping the same water

Both caverns on this page start from the same borehole, the same flow Q, temperature and blanket, and are run through exactly the same model as the 3D page: wall flux j = k (cs − c), recession dr/dt = j/ρs, 40 well-mixed layers in series. The only difference is where the fresh water enters. In the direct cavern it enters at the bottom and brine leaves at the roof; in the reverse cavern it enters at the top and brine is drawn from the bottom. The fresh-water front dissolves the wall fastest, so the reverse cavern widens at the roof and the direct cavern widens at the bottom - the shape that results is the real reason operators pick one method or the other and steer it with a blanket.

The colour inside each cavern is its brine concentration, from fresh (blue) to saturated (amber); the pale band under the roof is the blanket. The graphs compare the roof radius (a crude roof-span risk indicator), the outlet brine and the cavern volume of the two methods. Each cavern passes the same three checks as in 3D: the exact solution of one mixed layer, the high-flow wall recession rate, and the live salt balance.

Honest simplifications: axisymmetric, layer-mixed caverns; one effective mass-transfer coefficient; no insoluble rubble, creep, subsidence or pressure; the surface plant sprite is a Blender render drawn only for scale; the roof-span warning is illustrative. Educational model, not engineering design.

What to try
  • Run the two caverns side by side with the default flow: the left widens at the bottom, the right at the roof.
  • Set the blanket slider to 0 and see how much faster the reverse cavern grows its roof.
  • Press Cold slow leach: brine leaves almost saturated, the caverns grow slowly.
  • Read the third graph: the dashed line is the salt already shipped, expressed as rock volume - the gap to the solid line is salt still in the cavern as brine.
Roof radius of each cavern
Outlet brine concentration
Cavern volume gained and salt shipped
Made with 🟠 Blender